|Neil Wyatt||08/01/2020 09:57:25|
18102 forum posts
Proposed new ISO Standards for 2020 are now out for consultation:
ISO 935-4527 - Procedures for the efficient loading of dishwashers.
ISO 953-4574c - Approved ordering of cutlery in horizontal storage units.
ISO 100-R011 - Orientation of lavatory paper in wall-mounted holders.
ISO 100-5E47 - Protocols for the placement of toilet seats and their covers after use.
There's also an EU directive expected on the replacement of lids on beverage storage vessels.
(edited for clarity and accuracy )
Edited By Neil Wyatt on 08/01/2020 11:08:20
463 forum posts
|Brian H||08/01/2020 10:08:15|
1731 forum posts
Neil, it's not April 1st.
|David George 1||08/01/2020 10:22:12|
1297 forum posts
I worked in the plastics industry making various tooling for many molders and two came up as dangerous one was a bleach manufacture and with a new style of screw top, the polymer was changed from the original and it was later found that the lid became brittle with time, and split, not good for keeping the bottle sealed. The other was a blow moulding for a carbonised drink and the pressure exceeded the strength of the neck piece if the bottle was shaken or dropped, the end of the bottle snapped as the top was unscrewed and a young person actually lost the sight in one eye. I made a container for containing amputated limbs in operating theaters for disposal but that is another story. Just to say that not all standards are rubbish but some of them are a total wast of time.
|David Colwill||08/01/2020 10:28:03|
|643 forum posts|
I generally place these above the toilet. I did try putting one 5 feet to the left of the toilet but this led to a pretty awful smell and it had to be moved to the correct position.
|1012 forum posts|
My thoughts are unpublishable
|Grindstone Cowboy||08/01/2020 10:41:45|
|323 forum posts|
ISO 100-R011 - at last, something to make people do it the correct way. Which is, of course, paper feeding downwards from the wall side.
Edited By Grindstone Cowboy on 08/01/2020 10:42:38
|Bryan Cedar 1||08/01/2020 11:00:05|
|51 forum posts|
I disagree, always paper away from wall. It is easier to grasp it that way.
808 forum posts
I think it is all very inconvenient
|Harry Wilkes||08/01/2020 11:56:59|
956 forum posts
Neil given the likes of straight bananas etc your tongue in cheek post would not surprise me
|372 forum posts|
|Nicholas Farr||08/01/2020 12:29:14|
2403 forum posts
Hi David, they need to be a precision fit, i.e. they need to go onto the top of the bowl rim with the hinged part at the back. The accuracy of the x & y about the central position can be plus or minus a tad each way. Fitting it in this way, I find them to be extremely efficient and avoids much of the smell and stops you getting a bogy surface below when in use. It does help though, for the rim to be in a reasonable horizontal plain. Hope this helps.
|Ian Skeldon 2||08/01/2020 12:29:48|
|487 forum posts|
Hahaha love it especially ISO 100-R011 - Orientation of lavatory paper in wall-mounted holders. loo roll indeed.
|1462 forum posts|
You missed out ISO 100-d1rty - Protocols for always washing hands after using the toilet!
Edited By V8Eng on 08/01/2020 12:49:29
4759 forum posts
Actually there probably are standards for handwashing somewhere. I've seen the instructions posted above surgeons' hand wash sinks outside operating theatres in hospitals I worked at. Specified number and direction of rubs with liquid soap etc and rinse duration and then elbows only used to close faucet.
|Howard Lewis||08/01/2020 13:28:01|
|3536 forum posts|
Your calendar is over advanced by nearly three months, by my reckoning!
If it was three hours, I would imagine that you had gone on holiday somewhere exotic.
Or are you just checking to see if we are awake?
|Mick B1||08/01/2020 13:43:47|
|1651 forum posts|
Absolutely. It also mitigates risk of transfer of bacteria present on the wall.
1713 forum posts
I once heard the only logical reason I've noticed(as opposed to blind preference) for doing it one way or the other (in this case towards wall):
.... imagine that you have small kids.
808 forum posts
How then does this affect the industrial size roll with the axis of rotation at 90deg to the wall
|duncan webster||08/01/2020 15:27:12|
2732 forum posts
There actually is a British Standard (yes British, nothing to do with EU or ISO) for making a cup of tea
Please login to post a reply.
Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!
You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.
Click THIS LINK for full contact details.
For subscription issues please see THIS LINK.