|Robert Bailey 1||29/12/2019 10:30:07|
|8 forum posts|
I purchased a Harrison L5A 11 inch which came with these change wheels that are for another lathe. I would be grateful for help identifying what they fit so I can sell them and the proceeds go towards obtaining some of the right ones. There's a total of 6, 16DP at 100 % confidence, Teeth 55, 60, 65, 70, 75 and 100. 3/4 inch bore, 1/2 inch wide, 1/8 inch keyway. The cast ones have a L4 marking and what looks like 88 or 86 but could just be marks from the runner or raiser.
|Martin Connelly||29/12/2019 19:35:56|
1026 forum posts
Smart and Brown model M, possibly other models as well.
|Robert Bailey 1||29/12/2019 19:52:01|
|8 forum posts|
Thanks, There were some Smart and Brown threaded catch plates included to.
|old mart||29/12/2019 19:59:23|
|1251 forum posts|
I agree, the L4 is a common S & B casting / forging mark, and 16DP is one of their gear tooth sizes for the model M type.
|not done it yet||29/12/2019 20:42:46|
|4168 forum posts|
Not suitable for your lathe?
If you could cut centres, might it be a better to modify these than buy originals?
Please login to post a reply.
Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!
You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.
Click THIS LINK for full contact details.
For subscription issues please see THIS LINK.