By continuing to use this site, you agree to our use of cookies. Find out more
Forum sponsored by:
Forum sponsored by Allendale Dec 6th

Indoor R/C Flight & a whole lot more

All Topics | Latest Posts

Search for:  in Thread Title in  
JasonB09/11/2019 20:35:48
avatar
Moderator
16574 forum posts
1772 photos
1 articles

This Video popped up on You-Tube, some quite amazing indoor flight, a bit more advanced than your old balsa and a rubber band!

More video of other subjects further down the thread

Edited By JasonB on 10/11/2019 07:41:27

Brian Oldford09/11/2019 21:14:16
avatar
586 forum posts
4 photos

I doubt the H&S stazi would allow that in the UK.

Harry Wilkes09/11/2019 21:17:38
avatar
729 forum posts
60 photos

Thanks for the entertaining video Jason

H

Bob Rodgerson09/11/2019 21:43:27
574 forum posts
166 photos

Indoor RC Flying has been going on all over the UK for many years ands I see no reason why the H & S Staxzi, as you call them would object to it.

Jeff Dayman09/11/2019 22:56:33
1661 forum posts
43 photos

Great models and great pilots - especially the jet model! Who wouldn't smile when a flying happy face lands in their lap? A-10 was great too.

Edited By Jeff Dayman on 09/11/2019 22:58:40

not done it yet09/11/2019 23:08:26
3583 forum posts
15 photos

I don’t see a problnem. Plenty of safety netting stretched around the flying area. OK, some people may have been too close to the netting, but that is no reason to ban it.

V8Eng09/11/2019 23:38:03
1324 forum posts
28 photos

Thanks for linking to that great display Jason.

There is usually a good indoor flying display in the London Model Engineering Exhibition at Ally Pally.

Not on the same scale as the one Jason linked to but still good fun to watch (and yes it is behind netting).

Edited By V8Eng on 09/11/2019 23:43:23

Emgee10/11/2019 00:44:16
1272 forum posts
210 photos

As V8 says see it at the MEX every year, there are some very skilled young pilots in the UK who can hold their own with most in Europe and normally put on an excellent show.

Emgee

XD 35110/11/2019 03:07:36
avatar
1367 forum posts
118 photos

Never seen anything like it before ! Amazing skills and models !

LMAO watching the the witch !

JasonB10/11/2019 07:09:35
avatar
Moderator
16574 forum posts
1772 photos
1 articles

Now I've started to get more videos from the show come up. This is more like what MEX used to be where all the different branches of modelling were catered for at one big exhibition

One for the live steamers and model railway fans. That loco is pulling a LOT of people.

One with RC cars, heavy plant, Drone racing, outdoor flying including some big gliders if you are looking Andrew.

JasonB10/11/2019 07:50:45
avatar
Moderator
16574 forum posts
1772 photos
1 articles

I think the "jet" was actually using a ducted fans.

With the latest brushless motors and batteries you can probably make just about anything fly provided you can keep the weight down. A lot of those aircraft look like they were 3D printed rather than the more traditional construction methods which allows a very thin skin and minimal materials to form the core. So with a good power to weight ration they don't need a lot of airspeed to create vast amounts of lift.

Brian H10/11/2019 08:14:12
avatar
1294 forum posts
99 photos

Thanks for that Jason, very entertaining!

Brian

Ron Laden10/11/2019 08:39:40
avatar
1469 forum posts
259 photos

Thanks for posting Jason,

I agree the jet is almost certainly electric ducted fans, I wondered if it had vectored thrust it can loop in its own length with almost no forward airspeed for the control surfaces....maybe, dont know.

I know it was ideal conditions but as you say the steamer had a hell of a lot of people behind it.

Some good viewing..

p.s. Yes vectored thrust you can see it in some of the flight, impressive.

Edited By Ron Laden on 10/11/2019 08:47:58

Cornish Jack10/11/2019 10:12:29
954 forum posts
134 photos

Quite extraordinary!! The last indoor I went to was in the 80s, in the big hangar at Cardington - a rather different offering! IIRC we had the first demo (for the RAFMAA) of an R/C indoor model - balsa and microfilm and rudder only. How times have changed!

Most amusing? - the 'witch', of course. Most eye-watering? - as an ex-helo man, that demented green 'thing' at the end of the clip!!

Some mind-boggling aerodynamics going on there - excessive electric power, of course, but the low speed stuff and controllability of the Antonov, ATR , Horton twin jet and the Viggen etc.would make some very interesting Perf plots!

Thank you Jason

not done it yet10/11/2019 11:43:26
3583 forum posts
15 photos

This is more like what MEX used to be where all the different branches of modelling were catered for at one big exhibition

So who do you consider was responsible for the change? The exhibitors or the exhibition organisers - exhibitors wanting their own separate show or the organisers wanting more events?

A change for the better or worse?

Has this led to the demise of several model engineering exhibitions?

A good platform for some lively/honest discussion?

Btw - keep ‘em coming!

JasonB10/11/2019 13:22:32
avatar
Moderator
16574 forum posts
1772 photos
1 articles

Some outdoor flying

Drift cars, diggers, trials, etc
V8Eng10/11/2019 14:45:30
1324 forum posts
28 photos

Love watching this and it’s nice too see Concord flying again, just as an aside does anyone know how the two flying locomotives work.

Ron Laden10/11/2019 16:20:02
avatar
1469 forum posts
259 photos

Thanks again Jason, too many excellent areas of modelling to mention, good to see that modelling across the board is alive and well..

V8Eng, the two flying locomotives will be rigged like drones with two or more props producing down thrust and a gyro for stability and control, the things people think of..smiley

Edited By Ron Laden on 10/11/2019 16:21:29

Howard Lewis11/11/2019 15:14:53
2460 forum posts
2 photos

Have just read that all operators of flying machines weighing over 250 grammes will have to register the machine,pas a theory test and pay an annual licence fee of £9, or face a heavy fine.

This is intended to limit / eliminate the use of drones to disrupt airport activities, and to make flying safer.

Presumably, a gas turbine will survive ingesting a 240 grm object but not a 260 grm one?

Given the number of drones already sold into the public domain, this is going to be difficult to enforce.

This will place an additional load and cost onto the many model aircraft flyers who have no wish to be anywhere near a location where full size aircraft of any description, operate.

Looks like another piece of badly thought out legislation coming far too long after the event that it is intended to control. As usual, penalise the legal to avoid punishing those who are really guilty and ignoring the law.

Just like the UK gun controls. "We'll clamp down on you because you have a 12 bore. Nothing we can do about the smuggled AK47s"

For the record, I neither fly a drone, model aircraft, nor have ever owned a firearm.

Howard

Edited By Howard Lewis on 11/11/2019 15:17:16

Neil Wyatt11/11/2019 20:00:25
avatar
Moderator
16757 forum posts
689 photos
76 articles

That video proves that anything will fly if (a) it has a high enough power to weight ratio and (b) it is either naturally stable OR has a negative feedback control system to overcome any instability.

I liked the flapping whale...

All Topics | Latest Posts

Please login to post a reply.

Magazine Locator

Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!

Find Model Engineer & Model Engineers' Workshop

Latest Forum Posts
Support Our Partners
cowells
Eccentric July 5 2018
Tee London LMES 6th Dec
Eccentric Engineering
Allendale Electronics
Ausee.com.au
Warco
emcomachinetools
ChesterUK
Subscription Offer

Latest "For Sale" Ads
Latest "Wanted" Ads
Get In Touch!

Do you want to contact the Model Engineer and Model Engineers' Workshop team?

You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.

Click THIS LINK for full contact details.

For subscription issues please see THIS LINK.

Digital Back Issues

Social Media online

'Like' us on Facebook
Follow us on Facebook

Follow us on Twitter
 Twitter Logo

Pin us on Pinterest