By continuing to use this site, you agree to our use of cookies. Find out more
Forum sponsored by:
Forum sponsored by Allendale Oct 22nd

Newall DRO

All Topics | Latest Posts

Search for:  in Thread Title in  
John Parry 514/10/2019 00:15:06
7 forum posts

Hello Has anyone fitted a Newall NMS 300 DRO On a Colchester Bantam MK1? Having problems fitting the cross slide scale, because of the cut outs to get to the compound adjusting nuts. John

David George 114/10/2019 07:27:58
avatar
946 forum posts
310 photos

Hi John, can you use an extension perhaps an aluminium extrusion to move the scale backwards so that you can still get to the compound lock nuts. As long as the scale moves with the slide or the reader head moves it dosn' t mater that it is sticking out the back as long as it is sturdy.

David

Richard -14/10/2019 21:31:29
45 forum posts
6 photos

Not a great photo but it'll give you an idea, on a M250

dro.jpg

John Parry 515/10/2019 01:48:49
7 forum posts

Hello, Thanks for the idea of hanging the scale over the back there. That is the only way it is going to fit, i thought i was buying a Bantam specific DRO kit two months later and 35 phone calls and it's still not done. The Newall scales are very cleaver. it's a stainless steel tube with ball bearings inside that the reader head reads from. You would think buying British you would get some good instructions. John

David George 115/10/2019 07:32:56
avatar
946 forum posts
310 photos

In the past I have fitted these to many machines for 5 meter long boring machines to surface grinders just use the basic clamps and make your own brackets from pieces of ally angle and plate to suit machine. You can get a single ended mount scale but only if you have 12 inch or less movement. Have a look on Newell web site.

David

Edited By David George 1 on 15/10/2019 07:47:20

Andrew Evans15/10/2019 08:51:15
267 forum posts
1 photos

Not a Newall or a Bantam, but when I fitted a DRO to my Denford lathe of similar size I had to fabricate brackets out of angle that stick out the back of the cross slide. The included brackets didn't really help. There just isn't enough space otherwise. No problems with the z axis but I had to drill and tap holes in the casting.

It's stating the obvious but I fitted spring washers and used loctite to all fittings as I found vibrations loosened the screws over time and scales lost accuracy as the fixings had some end play.

KWIL15/10/2019 11:28:32
3127 forum posts
57 photos

Newall scales on my Myford S7s amd Harrison M300 all overhang partly to the rear. All single end mounted with own home made mounts. Single ended mount used for Bridgeport Quill DRO

Pics in Album

 

Edited By KWIL on 15/10/2019 11:38:06

John Parry 515/10/2019 20:27:58
7 forum posts

Kwil I like the way you have routed your cables very neat. How have you done that? I notice you are using all Microsyn scales?, the longer scale on mine is the steel type Spherosyn. I will post some photos of my install soon. John

JasonB15/10/2019 20:34:49
avatar
Moderator
16446 forum posts
1739 photos
1 articles

Have a look at what JS did part way down this page

John Parry 515/10/2019 21:36:53
7 forum posts

That is just the sort of information my brain has been looking for. Any thoughts on why i am getting Suds in the screw cutting gearbox? Thank's very much. John

KWIL16/10/2019 10:08:15
3127 forum posts
57 photos

John,

Yes microsyn on many scales but spherosyn on the Bpt (except the quill). Bpt has a summer on the vertical so sums the table and quill positions, so has to add microsyn and spherosyn together

Wiring fed through cable chains for neatness. Search KABELSCHLEPP Metool

 

Edited By KWIL on 16/10/2019 10:11:28

All Topics | Latest Posts

Please login to post a reply.

Magazine Locator

Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!

Find Model Engineer & Model Engineers' Workshop

Support Our Partners
TRANSWAVE Converters
Warco
cowbells
Meridienne; London MES
Eccentric July 5 2018
Eccentric Engineering
Ausee.com.au
ChesterUK
emcomachinetools
Allendale Electronics
Subscription Offer

Latest "Wanted" Ads
Get In Touch!

Do you want to contact the Model Engineer and Model Engineers' Workshop team?

You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.

Click THIS LINK for full contact details.

For subscription issues please see THIS LINK.

Digital Back Issues

Social Media online

'Like' us on Facebook
Follow us on Facebook

Follow us on Twitter
 Twitter Logo

Pin us on Pinterest