Remove weld from inside tubes
|Speedy Builder5||17/09/2019 15:46:44|
|1887 forum posts|
Came across this one - looked pretty good and well presented.
|martin perman||17/09/2019 16:39:53|
1737 forum posts
Interesting and logged in what brain cells I have
|355 forum posts|
If you go into YouTube and type #tipsblitz19 in the search box you will get a list of video tips that may come in handy for home machinists.
|old mart||17/09/2019 18:24:04|
|1085 forum posts|
He spoiled it for me when he held the hammer by the head end. It might have been because he knew the head was about to come off. And the cutting torch and sunglasses.
|Ian S C||18/09/2019 11:49:32|
7468 forum posts
I used a bit of 1.5" galv water pipe for a power cylinder of a hot air motor, got to just on the right bore then ping and the weld let go. I closed it up with a jubilee clip then ran a weld down the outside of the tube, the motor still runs well with a cast iron piston. After welding and boring to size it was honed with a brake cylinder hone, then lapped with a wooden lap.
Please login to post a reply.
Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!
You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.
Click THIS LINK for full contact details.
For subscription issues please see THIS LINK.