Split lathe from cabinet
|Arthur Goodwin||15/09/2019 14:35:07|
|1 forum posts|
Hi have just bought a denford viceroy lathe.
My problem is to transport it home I need to split the lathe from the cabinet.
Looking in the cabinet I can see 4 large nuts each with a smaller nut underneath the big one which is a bit of a puzzle.
Any help would be greatly appreciated.
|Pete Rimmer||15/09/2019 23:31:09|
|424 forum posts|
Removing the small nuts will release the bed from the cabinet IIRC the studs poke through the larger 'nuts'. If it's an underdrive model you'll still have the belt to think of and if it's a 280VS or Synchro there will be some electrics to take care of too before the bed will come off. Interlock switches, lo-volt light etc.
Please login to post a reply.
Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!
You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.
Click THIS LINK for full contact details.
For subscription issues please see THIS LINK.