By continuing to use this site, you agree to our use of cookies. Find out more
Forum sponsored by:
Forum sponsored by Allendale July 23rd

Lathe tool holder

All Topics | Latest Posts

Search for:  in Thread Title in  
Ian McVickers23/08/2019 22:33:40
134 forum posts
69 photos

Boufht myself a new lathe quick change tool post and decided to have a go at making some holders. So 30mm thick plate, 240mm long 85mm wide, on the mill surfaced up. Dovetail slot roughed out to depth and started cutting the dovetails. Anyway don't know how I managed it but i`ve cut the dovetail slot 0.5mm too wide. So I really don't want to have to scrap the plate so I could weld up one side and recut it, probably killing the cutter in the process or I could make a shim and pin it to the top of the holder to keep it in place. Any other options to save the bar?

Paul Lousick23/08/2019 23:22:09
1151 forum posts
492 photos

Instead of a pin to secure the shim, could you use Loctite instead ?

Another option is to braze or silver solder to build up the surface. Then re-machine to size. Not so severe on your cutter.

Paul.

Edited By Paul Lousick on 23/08/2019 23:25:31

John Reese24/08/2019 00:58:22
772 forum posts

If it is an Aloris clone it would be faoirly tolerant of dovetail width. Try it on the toolpost before doing anything else.

I have some oddbaall toolholders with a dovetail slightly too large for the toolpost. I use a shimcto make them work.

Ian McVickers24/08/2019 10:47:45
134 forum posts
69 photos

Thanks guys. It is an aloris type and it does grip the blank tool holder but its right at its limit. I will try out a shim with some Loctite and see how it goes. I`ll need to be more careful with the next batch.

DC31k24/08/2019 17:28:54
52 forum posts

If there are many holders and only one toolpost, could you shim the toolpost itself?

Ian McVickers24/08/2019 19:01:37
134 forum posts
69 photos

This is the first batch. I will get 5 or 6 from the current bit of bar but I'm planning on making more and also getting the next ones right.

Neil Wyatt24/08/2019 22:32:17
avatar
Moderator
16435 forum posts
685 photos
74 articles

I made a batch of a dozen holders, one was a tad too deep so I glued a shim to the bottom of the dovetail (not the angled side) and it's still going strong.

Neil

Bill Pudney25/08/2019 01:30:04
415 forum posts
16 photos

I did exactly the same thing with some toolholders. The problem was cured with a steel shim and JB Weld. There were two problems, P1,clamping the shim in place, required a small bit of mylar as a release agent, to ensure that everything wasn't stuck together forever, and P2 leaving the toolpost and toolholder clamped up for 24 hours whilst the epoxy cured.

Best of luck,

cheers

Bill

old mart25/08/2019 14:24:22
444 forum posts
42 photos

You could hold the shims with a couple of 2mm countersunk screws, if you are up to tapping small holes.

All Topics | Latest Posts

Please login to post a reply.

Magazine Locator

Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!

Find Model Engineer & Model Engineers' Workshop

Latest Forum Posts
Support Our Partners
Warco
Eccentric Engineering
ChesterUK
Ausee.com.au
TRANSWAVE Converters
Eccentric July 5 2018
Advertise With Us
Meridienne oct 2019
Allendale Electronics
emcomachinetools
Subscription Offer

Latest "For Sale" Ads
Latest "Wanted" Ads
Get In Touch!

Do you want to contact the Model Engineer and Model Engineers' Workshop team?

You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.

Click THIS LINK for full contact details.

For subscription issues please see THIS LINK.

Digital Back Issues

Social Media online

'Like' us on Facebook
Follow us on Facebook

Follow us on Twitter
 Twitter Logo

Pin us on Pinterest