|Trevor Drabble||11/08/2019 07:44:18|
201 forum posts
Just want to praise Tracy Tools for their excellent service . Ordered a couple of taps from them around lunchtime on Friday and they arrived by first class post on Saturday . I believe such companies deserve all the support we can give them both directly and at the shows .
|Paul M||11/08/2019 08:52:59|
|26 forum posts|
I could say the same for a number of companies. Ordered a set of cast wheels form A J Reeves about 12.00 on Thursday and they arrived the following day by 10.00am.
Speed of delivery depends very much on the postage you pay.
|164 forum posts|
+1 for Tracy Tools. I ordered an M3 tap online recently. 10 minutes later, I realised that it was actually an M4 tap that I wanted. On the ‘phone to explain my predicament: not a problem. They changed the order details and the correct tap arrived in the post the next day. I have always had good service from them.
|Trevor Drabble||11/08/2019 23:42:34|
201 forum posts
Paul , Good to hear there are a number of such good companies out there in these turbulent times . Would you care to share details of those you would recommend please in order that both the rest of us and they may potentially benefit ?
113 forum posts
I've ordered from Tracey before, and in the past, with M3 / M4 / M5 dies, they've come with a lead in on both sides. Has anyone had a small die from Tracey Tools and does it come with lead in on one side only? I guess I could drop them a mail, or maybe see them at Warwick in Oct.
|738 forum posts|
I asked a question yesterday on here - SUNDAY - ref a flat bottom hole and was advised on a D Bit.
Tracey Tools listed a 3/16 diam but no length stated.
Email sent asking length - reply received within an hour confirming length and would be suitable.
Plus 1 for service from me
|Russ B||12/08/2019 09:48:57|
|547 forum posts|
+1 from me too, have ordered several things and been surprised every time by the speed of delivery.
Edited By Russ B on 12/08/2019 09:49:13
|Nigel Graham 2||12/08/2019 11:03:28|
|386 forum posts|
Yes - I concur. I've bought quite a few tools over the years from Tracy Tools, I'm about to place another order, and I have named them in response to a question elsewhere on here about suppliers of lathe tooling.
|2255 forum posts|
I preferred Tracy Tools when they had a shop in Isleworth. I’ve not used them much but service has been good. Sadly they can’t compete very well on price or I’d use them more often.
|Andrew Tinsley||13/08/2019 13:17:20|
|919 forum posts|
I am surprised to hear you say that Tracy Tools don't compete well on price. I have always found their prices to be excellent for the quality of the tools they sell.
If you have a cheaper source for the same quality, then I am sure many people would be interested to know.
|Mick B1||21/08/2019 15:52:49|
|1187 forum posts|
+1 again here.
4 small HSS items ordered Sunday evening, total value a tenner including carriage and VAT, delivered Tuesday morning. Even in some dreamworld where there was a local village shop selling such stuff, it could scarcely've done as well. Well done Tracy Tools.
Please login to post a reply.
Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!
You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.
Click THIS LINK for full contact details.
For subscription issues please see THIS LINK.