By continuing to use this site, you agree to our use of cookies. Find out more
Forum sponsored by:
Forum sponsored by Allendale Oct 22nd

harrison l5 start gear

harrison start gear

All Topics | Latest Posts

Search for:  in Thread Title in  
Thomas Shannon22/05/2019 19:59:07
8 forum posts

Hi all I got a fairly run down l5 that I have been doing up. It seams the contact points coil jumps back up after pressing start, the contact points are also arcing. I'm running a 220v single to 3 phase inverter from ebay. It work if I hold down the contact points plate. Any ideas? I may just clamp the top plate down and just run it from the switch. my inverter says 220v 3ph but I guess that's just per phase voltage?

the inverter is   

https://ebay.us/E0ysqj

 

Edited By Thomas Shannon on 22/05/2019 20:17:24

Alan Waddington 222/05/2019 20:32:27
448 forum posts
86 photos

You really need to wire the inverter direct to the motor and not through any of the lathe switchgear.

ive converted a couple of L5’s to run from inverters, and in each case had to dig the star point out of the motor.

so unless yours has had the motor swapped at some time to a star/delta motor, you will need to do the same.

Thomas Shannon22/05/2019 20:39:46
8 forum posts

hi alan

ok i get that. if its not wired in delta would it still run ? as mine runs fine with holding down the contact points plate its a 1958 l5 with the stock motor. its just the contact points plate wont stay down after pressing start

Alan Waddington 222/05/2019 20:46:10
448 forum posts
86 photos

I Think it will run, but not properly, probably find it will stall under load, never tried it to be fair.

whip the motor cover off and see how many wires are coming out of the motor, you need six.

Alan Waddington 222/05/2019 20:48:35
448 forum posts
86 photos

Have a read of this Thomas **LINK**

Thomas Shannon22/05/2019 20:49:53
8 forum posts

only 3 wires come out to the junction box, so i assume its in star and i need to find the joins and reconfigure the windings to delta ? yea didnt seam very strong to be fair

Thomas Shannon22/05/2019 20:56:14
8 forum posts
Posted by Alan Waddington 2 on 22/05/2019 20:48:35:

Have a read of this Thomas **LINK**

no, thanks very much !

Alan Waddington 222/05/2019 21:47:04
448 forum posts
86 photos

Yeah, they are dead easy to do, strip the motor and star point is fairly easy to find....... Well it was on the ones I did anyhow.

All Topics | Latest Posts

Please login to post a reply.

Magazine Locator

Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!

Find Model Engineer & Model Engineers' Workshop

Latest Forum Posts
Support Our Partners
Ausee.com.au
Warco
Eccentric July 5 2018
cowbells
Eccentric Engineering
TRANSWAVE Converters
Meridienne; London MES
ChesterUK
emcomachinetools
Allendale Electronics
Subscription Offer

Latest "For Sale" Ads
Latest "Wanted" Ads
Get In Touch!

Do you want to contact the Model Engineer and Model Engineers' Workshop team?

You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.

Click THIS LINK for full contact details.

For subscription issues please see THIS LINK.

Digital Back Issues

Social Media online

'Like' us on Facebook
Follow us on Facebook

Follow us on Twitter
 Twitter Logo

Pin us on Pinterest