By continuing to use this site, you agree to our use of cookies. Find out more
Forum sponsored by:
Forum sponsored by Allendale July 23rd

Pittler lathes

Any Pittler B2 lathe owners out there?

All Topics | Latest Posts

Search for:  in Thread Title in  
vic newey18/05/2019 16:42:11
31 forum posts
24 photos

I've just rescued a Pittler lathe from a shed. The previous owner bought it a few years ago with the intention of learning metalwork but never got it up & running, he could not fathom how the headstock gearing fitted together so it was abandoned.

It was recently on Ebay but it ended and nobody bid so as it was only 20 miles away I went to have a look. It was in a tiny shed with the countershaft on the floor behind it but I manged to have a look.

As it was not running I was very wary so made him a reasonable offer and he accepted it although he had also relisted the lathe on Ebay.

It's the actual B2 lathe with serial number 1253 as shown on the Lathes.co.uk website. I did Email Tony Griffiths to ask when it was (presumably) sold by him but not had a reply yet.

It has an overhead countershaft and somewhat complicated looking pullies and belts which at present are not all connected as I have no idea what goes where. A full set of gears and worms, both steadies, faceplate etc all numbered 1253 plus several chucks, tailstock & headstock items with drawbars, indexing equipment and three boxes of various tools.

It was in desperate need of oil so I made sure everything was tended to and got it up and running in no time. Everything is there, nothing appears missing so I'm quite happy with it as a second machine to my Holbrook model B8 which is right next to it!

Edited By vic newey on 18/05/2019 16:43:19

Former Member18/05/2019 18:18:43

[This posting has been removed]

vic newey18/05/2019 19:44:06
31 forum posts
24 photos

pittler.jpgI ended up offering £900, only after getting it home and sorting through the boxes did I find that nothing important was actually missing, I've just received the 1941 ME hardback book, it has five sections on the Pittler by the same author. I also want the 1940 issues so looking out for them

Edited By vic newey on 18/05/2019 19:47:50

Edited By vic newey on 18/05/2019 19:51:25

Michael Gilligan18/05/2019 19:58:24
avatar
13827 forum posts
603 photos

Classy machine, Vic

... Well saved !!

MichaelG.

KWIL18/05/2019 20:42:12
3111 forum posts
56 photos

The famed Cherry Hill also uses a Pittler.

Former Member18/05/2019 22:13:02

[This posting has been removed]

vic newey18/05/2019 22:33:51
31 forum posts
24 photos
Posted by Haggerleases on 18/05/2019 22:13:02:

Ebay. Why does't thou mock me!!

If it's any consolation it was extremely difficult to get the lathe out as right in front of the shed was like an obstacle course as a huge new building is going up right in front.

Luckily for me my son has access to a flatbed with tail lift and it took 3 men to struggle to get the lathe over to the lorry. Without having access to that I would not have bought the lathe

I would also add that it's not really ideal for a beginner and the head and tail stocks do not have a modern morse taper so nothing easily available will fit.

In fact I'm not sure myself what the fitment is actually called, can anyone advise?

Edited By vic newey on 18/05/2019 22:34:52

Michael Gilligan18/05/2019 22:48:32
avatar
13827 forum posts
603 photos

Vic,

Browsing around ... I found this page: **LINK**

http://www.remark.me.uk/pages/workshop/projects/models/pittlerconst.html

The last line of which mentions: ...

the series of articles by Geo.Gentry in Model Engineer vols. 82 & 84

It might be worth you looking-out for those.

MichaelG.

vic newey19/05/2019 08:51:59
31 forum posts
24 photos
Posted by Michael Gilligan on 18/05/2019 22:48:32:

Vic,

Browsing around ... I found this page: **LINK**

http://www.remark.me.uk/pages/workshop/projects/models/pittlerconst.html

The last line of which mentions: ...

the series of articles by Geo.Gentry in Model Engineer vols. 82 & 84

It might be worth you looking-out for those.

MichaelG.

Thank you Michael, I had spotted the refs to George Gentry in old magazines., bound volume 84 (1941) arrived Friday via Amazon, it was only £9 + post as it was well used, it has five very detailed articles on the Pittler.

Vol 83 (1940) has some more and I had ordered that for a similar price and it was marked as dispatched only for an email to arrive saying they could not locate it in the shop and are refunding me!

Luckily there seems to be an ample supply of these old magazines

kind regards

Vic

vic newey25/05/2019 16:47:46
31 forum posts
24 photos

r/hand side of latheHere are some more photo's. I have assembled the countershaft to include the belt tensioner, it works via a fulcrum and suspended weight. The uprights fit directly onto special round brackets on the back of the lathe casting as an original optional extra provided with the lathe

The crossbar at the top has a keyway and the pulley is free to slide along in line with the topslide whilst the shaft is turning when using certain accessories.
In the ME issues of 1941 there are a series of 5 articles on the Pittler, all by George Gentry. The 1940 issues have the first parts of the series which i've not got yet.

The other photo shows the/hand part of the lathe, a countershaft on a lower bracket connects with the indexing device. Another indexing device fits at the headstock end and has four discs with it. These are called 'knife edge' types, there are 100 cuts around the rim, later types had 4 sets of holes & a plunger.

Mr Gentry describes in great detail of how the indexing works although I'm still somewhat confused. He describes this shaft is for auto power feed and another means to drive the lead screw for minute indexing. This lathe appears to have the extra long traverse of the cross slide he refers to in one of the pages

pittler model  b.jpg

Edited By vic newey on 25/05/2019 16:49:50

Edited By vic newey on 25/05/2019 16:50:30

All Topics | Latest Posts

Please login to post a reply.

Magazine Locator

Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!

Find Model Engineer & Model Engineers' Workshop

Support Our Partners
Eccentric Engineering
Warco
Meridienne oct 2019
TRANSWAVE Converters
Eccentric July 5 2018
Advertise With Us
ChesterUK
Ausee.com.au
Allendale Electronics
emcomachinetools
Subscription Offer

Latest "For Sale" Ads
Latest "Wanted" Ads
Get In Touch!

Do you want to contact the Model Engineer and Model Engineers' Workshop team?

You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.

Click THIS LINK for full contact details.

For subscription issues please see THIS LINK.

Digital Back Issues

Social Media online

'Like' us on Facebook
Follow us on Facebook

Follow us on Twitter
 Twitter Logo

Pin us on Pinterest