|Matt Stevens 1||15/04/2019 17:51:42|
|46 forum posts|
I am thinking already about my next model! I have enjoyed making the Stuart D10 as well as the Stuart twin Victoria and i guess you can say i like Stuart models!
So i was thinking about the Triple Expansion engine next....then i saw that AJ Reeves makes a competitor product to which i have no information about.
Anyone got any opinions about either one? Maybe there are other Triple expansions worth considering?
15038 forum posts
The Bolton whether from Reeves or EJ Winter is a much more detailed engine and has a lot of the features found on full size examples, the cast standards will be more involved particularly the one with the condenser cast in rather than the relatively simple turned legs of Stuart.
Be aware that neither engine will run well on compressed air and may need some alterations to the pipework if that is how you intend to run them, fine on steam. certainly worth getting hold of the old back issues that cover the build of the Bolton if you opt for that.
|103 forum posts|
A few weeks back there was a thread saying about the poor quality of some Reeves castings and the terrible customer support. In a nut shell, apparently they are selling castings they know are bad.
|Matt Stevens 1||15/04/2019 18:46:30|
|46 forum posts|
....so far you are swaying me towards the Stuart model! I believe that also is not an easy model to make.
|350 forum posts|
Plus 1 for Stuart.
I have only had one casting with a blow hole when machined.
Andy at Bridport put a new one in the post immediately - well pleased.
Plus I like Stuart prices as opposed to other suppliers.
|martin perman||15/04/2019 18:55:08|
1519 forum posts
My Grandfather made a Stuart Triple Expansion engine on his Treddle lathe forty years ago so I cant be that difficult to build he ran it in one of his model Tug boats.
My mother still has it as an ornament.
|Jon Lawes||15/04/2019 20:51:14|
289 forum posts
My 10H was quite slow to arrive from Stuart; it was a birthday present ordered a few months before my birthday, and my birthday came and went, and more weeks besides. When it did turn up I had a problem with one of the castings, which to their credit they replaced without quibble. However there was the same delay of just over a month for the new one to arrive. The general quality of the 10H kit was very good indeed.
Stuart's customer service was good, but you have to wait for them...
My experiences with Reeves I have spoken about before. My personal experiences with their customer services encourages me to use other vendors unless there isn't another option.
Please login to post a reply.
Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!
You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.
Click THIS LINK for full contact details.
For subscription issues please see THIS LINK.