By continuing to use this site, you agree to our use of cookies. Find out more
Forum sponsored by:
Forum sponsored by Allendale Nov 29

Turning over a new Leaf

All Topics | Latest Posts

Search for:  in Thread Title in  
John Milton 225/03/2019 19:30:33
57 forum posts
68 photos

Hi everyone

I was hoping to join quietly but it seems my first job is an introduction so.. Here goes. I'm a 50+ Londoner living in Lancashire, that's a very long story in itself. I used to be a Carpenter but the dust is no good for me as I am a chronic Asthmatic, so I thought maybe Metalwork is the way to go to ease my daily boredom.

I purchased a small simple lathe about two months ago on a whim and although it was a little moth eaten it seemed to work okay. I decided to strip it and repaint it as I had no clue what I even wanted to do with a Lathe as yet. So I set about removing all of the old paint and I found that it was hiding some P38 disguised as glue so used my (second hand inherited) welder to bridge the gap and fix it. First ever weld and it worked okay I think. Sanded and re-painted I was now hooked so went out looking for more.

i'm all in and have now completed a second refurbishment of a Clarke Lathe and using it as a stepping stone to something a little better. I try to do things properly so I am renovating as an excuse to not do any turning as yet. looking for as much info before I start to play and save myself from losing my fingers or limbs. I have kept all my photos and short videos as I have gone along so I may share them if there is any interest.

I'm going to be looking for some advice and I'm in turmoil though as weighing up all the different options mean my head gets turned again and again while I am looking for the very best option. I Will have a read of some articles and then just dive in I guess.

Cheers John

Martin W25/03/2019 19:48:47
782 forum posts
29 photos

John

Welcome to the madhouse that said there are a whole pile of people on here who will be only too pleased to give you sound and valuable advice. I know that there will be interest in your pictures and videos and once here they could well be of benefit to others.

Cheers

MartinW

Chris Evans 625/03/2019 19:50:44
1374 forum posts

Welcome along John, enjoy your new found interest and ask as many questions as you like.

John Milton 225/03/2019 19:51:49
57 forum posts
68 photos

Thanks Martin, I guess I will be uploading some then

John Milton 225/03/2019 19:53:22
57 forum posts
68 photos

Thanks Chris I will do.

Brian Hutchings25/03/2019 19:54:48
9 forum posts

Welcome John, what sort of lathe do you have?

A good source of information is; lathes.co.uk.

Brian

John Milton 225/03/2019 20:33:42
57 forum posts
68 photos

Hi Brian

I have uploaded some photos of my first project simple Lathe. My second is a Clarke CL500M. I will upload some pics of that one tomorrow at some point. 14 days and nights solid to clean it up strip it rewire and paint it.

Hopper25/03/2019 23:35:01
avatar
3391 forum posts
65 photos

Looks a bit Super Adept-ish but not quite. There is a squad of Adept experts on here who will be able to advise on that. Nice work, whatever it is.

John Milton 226/03/2019 07:15:24
57 forum posts
68 photos

Thanks Hopper for the pointer.

My aim is to sell this one on ASAP as I'm on a mission to get a fund together for a decent Lathe to tinker around with. Looking at some threads on here my initial plan for a good old fashioned English engineered Lathe is not as important as I first thought.

David Noble28/03/2019 18:39:32
avatar
49 forum posts
1 photos

Hello John,

There is a whole stack of talent on here willing to help as I've found out Shout if I can help.

David

fizzy28/03/2019 19:46:09
avatar
1559 forum posts
104 photos

Hi John. I too am in Lancashire and am not native to these parts. I also run a little company called Pendle Steam Boilers and have owned a fair few lathes and the like over many years. Welcome to the forum and if you need help with anything just pm me.

John Milton 228/03/2019 21:15:09
57 forum posts
68 photos

Thanks so much. I just took delivery of my next project today but think I have bitten off more than I can chew. Photos to follow.

JohnF29/03/2019 12:15:08
avatar
758 forum posts
85 photos

Welcome to the forum John, another Lancashire lad here -- t'other side of't t'hill from Fizzy though just outside the County town!

Looks a fair project you have acquired !  Where in Lancashire are you ?

John

Edited By JohnF on 29/03/2019 12:18:55

John Milton 229/03/2019 12:53:03
57 forum posts
68 photos

Hi John, I'm in sunny Blackburn but still trying to keep my Cockney accent as best I can after 15 years of lanky dialect I mean GRAVY on Chips though!! Well to be fair I now agree it's not THAT bad haha

John Milton 229/03/2019 12:55:09
57 forum posts
68 photos

Not even sure which forum to post my documented attempt to breath life into this ML 1-2-3-4 any pointers please?

All Topics | Latest Posts

Please login to post a reply.

Magazine Locator

Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!

Find Model Engineer & Model Engineers' Workshop

Latest Forum Posts
Support Our Partners
Eccentric July 5 2018
Eccentric Engineering
Ausee.com.au
Warco
ChesterUK
emcomachinetools
Allendale Electronics
TRANSWAVE Converters
Sarik
Subscription Offer

Latest "For Sale" Ads
Latest "Wanted" Ads
Get In Touch!

Do you want to contact the Model Engineer and Model Engineers' Workshop team?

You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.

Click THIS LINK for full contact details.

For subscription issues please see THIS LINK.

Digital Back Issues

Social Media online

'Like' us on Facebook
Follow us on Facebook

Follow us on Twitter
 Twitter Logo

Pin us on Pinterest