Query on how to calibrate a PCL Mk3 tyre inflator
|Rob Rimmer||15/03/2019 15:00:14|
|61 forum posts|
Does anyone have any experience on adjusting / calibrating a PCL Mk3 tyre inflator? I've had it about thirty years, and always regarded it as being more accurate than any other gauges I own, but recently noticed that, compared with three other gauges I tried (which all agreed to within 1 lb/sq in), it's reading about 5 too high - an indicated 40 is about 35 by the other three. The others are a very old Dunlop slidey piston type, a dial gauge I picked up in the USA, and a cheapish digital one. If they all disagreed, I'd still believe the PCL, but they don't.
I know you can't really rely on anything to stay calibrated too long, but is there an easily accessible adjustment screw or something that I could tweak to get it a bit closer to my perceived reality?
|Rob Rimmer||19/03/2019 09:40:47|
|61 forum posts|
Just to close this thread off, and in case anyone needs similar information, this is the reply I received from PCL:-
"Sorry the MK3 cannot be adjusted or recalibrated.
The gauge should be oiled, this will prevent the gauge from sticking, which can give incorrect readings.
It should be oiled a few times a month depending on usage. The oil screw is located above the serial number."
Well, mine has never been oiled since I bought it, so hopefully this will help.
Please login to post a reply.
Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!
You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.
Click THIS LINK for full contact details.
For subscription issues please see THIS LINK.