By continuing to use this site, you agree to our use of cookies. Find out more
Forum sponsored by:
Forum sponsored by Allendale Nov 29

Fed up of all this wind

All Topics | Latest Posts

Search for:  in Thread Title in  
Plasma15/03/2019 12:29:55
66 forum posts
6 photos

Well living in south yorks with the foot of the pennines not far to the west of me I'm fed up of all this wind!

I built a small anemometer style wind indicator for the garden (three hemispheres on radial arms off a central bearing) and it's going like the clappers.

SWMBO keeps on looking at it and saying "why dont you put a generator on it? We could run the outside lights" etc.

Good idea, but I've no clue as to how to develop her plan.

I remember every chalet on humberston fitties camp site having an old telegraph pole with a truck dynamo on top rigged with a crude wooden propeller. A shed full of 12v batteries completed the ensemble and certainly powered lights etc.

Can it be that simple? Or are there better ways these days?

Would t'council have something to say if I stuck a pole in my garden?

Just musing while I wait for the shed roof to blow off.

Blustery of Barnsley

Bazyle15/03/2019 12:47:01
avatar
4390 forum posts
184 photos

Are you aware of Scoraigwind? Planning restrictions prevent most people from having turbines and home sized ones are unlikely to recoup the cost of the planning application.

I too live in a very windy place and logically should be able to benefit from a turbine but my enthusiasm was curbed by the above problems. Perhaps after the oil runs out and electricity hits £5 per KWh it will become viable.

Plasma15/03/2019 12:59:06
66 forum posts
6 photos

Bazyle, just had a look, it seems a great resource.

I will have a look into it and see if its viable. As regards planning permission.... I always think it's easier to ask forgiveness than to ask for permission 😉

Guy Lamb15/03/2019 17:53:14
23 forum posts
Posted by Plasma on 15/03/2019 12:29:55:

Well living in south yorks with the foot of the pennines not far to the west of me I'm fed up of all this wind!

I built a small anemometer style wind indicator for the garden (three hemispheres on radial arms off a central bearing) and it's going like the clappers.

SWMBO keeps on looking at it and saying "why dont you put a generator on it? We could run the outside lights" etc.

Good idea, but I've no clue as to how to develop her plan.

I remember every chalet on humberston fitties camp site having an old telegraph pole with a truck dynamo on top rigged with a crude wooden propeller. A shed full of 12v batteries completed the ensemble and certainly powered lights etc.

Can it be that simple? Or are there better ways these days?

Would t'council have something to say if I stuck a pole in my garden?

Just musing while I wait for the shed roof to blow off.

Blustery of Barnsley

A common and cheep way of getting a wind mill to charge batteries on board boats especially is to fit a 'Dynohub' bicycle hub generator (common on Raleigh bikes) with blades. The only tricky bit is the bridge rectifier to change the output to D.C.

Guy

Phil Whitley15/03/2019 18:17:54
775 forum posts
102 photos

Been checking out http://www.gridwatch.templar.co.uk/ every day this week, and several days, wind was the largest UK generating source. Nuclear comes in a poor third, and coal virtually unused.

Samsaranda15/03/2019 18:55:48
avatar
603 forum posts
4 photos

There are regulations concerning wind generators at domestic premises and as long as you meet certain provisions you don’t need planning permission, there are height requirements depending on whether freestanding or attached to the house. We have just had solar panels installed before Xmas and I would like to supplement them with a wind generator, we do live in a coastal area so no shortage of wind, especially this last week, was clay pigeon shooting last Sunday and the wind certainly made it very challenging.

Dave W

not done it yet15/03/2019 19:05:09
2640 forum posts
11 photos

Gridwatch Templar only includes those sites that supply real time generation. There is considerably more wind generation which either does not update its generation so regularly or simply does not show on the grid demand as it is 'behind the meter' (generated power is used by the owner of the turbine(s)). The total wind generation estimate is shown on some other sites (but I, too, keep an eye on the gridwatch site).

There have been several 'home' turbines supplied over the years. Most were simply 'chocolate teapots' in that they never ever recouped the cost (even our ex-prime minister had one fitted (in a wave of publicity, of course) but it was quietly removed some time later).

There are small turbines made specifically for boats and for charging electric fencer batteries, but the turbulence around most dwellings spoils the output. There may be issues with third party insurance - especially if towers and rotating aerofoils are concerned). Have a look at the Navitron.org.uk site for advice or information.

Mike Poole15/03/2019 19:05:20
avatar
1753 forum posts
44 photos

Rennie Deflatine?

Mike

Frances IoM15/03/2019 19:10:45
562 forum posts
22 photos
there is a comment column in the April 2019 IET E+P about the problem of restarting a network with significant windpower component in the absence of a large enough base load component eg thought that in case of significant collapse caused eg by sub station or overhead line faults failure then it could take up to 5 days to reconnect all of Scotland from 'black' ie a dead network (London may well have same timescales)

All Topics | Latest Posts

Please login to post a reply.

Magazine Locator

Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!

Find Model Engineer & Model Engineers' Workshop

Latest Forum Posts
Support Our Partners
ChesterUK
Eccentric Engineering
Eccentric July 5 2018
Warco
Ausee.com.au
Allendale Electronics
TRANSWAVE Converters
Sarik
emcomachinetools
Subscription Offer

Latest "For Sale" Ads
Latest "Wanted" Ads
Get In Touch!

Do you want to contact the Model Engineer and Model Engineers' Workshop team?

You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.

Click THIS LINK for full contact details.

For subscription issues please see THIS LINK.

Digital Back Issues

Social Media online

'Like' us on Facebook
Follow us on Facebook

Follow us on Twitter
 Twitter Logo

Pin us on Pinterest