|Nick Hughes||04/03/2019 19:02:40|
196 forum posts
At last the Final installment:-
The two Internal Grinding Extensions both start out as 3/4" Dia FCMS. The Spindle mounting bore and threads are machined in the same way as the Spindle Drive Pulley previously,
To ensure true running of the extensions when mounted on the grinding spindle, a copy of the spindle end is machined,
Each extension is now fitted to the above, finish turned (with tailstock support), then drilled, tapped, bored and reamed,
Apart from painting, that's it complete!
Thanks for all the kind comments and hopefully the photos will help others with ideas for various setups.
Edited By Nick Hughes on 04/03/2019 19:05:49
|Oily Rag||10/05/2019 18:23:28|
22 forum posts
Great series of posts Nick, very well written and good photos. Thank you very much for that. I hope the hangovers are not troubling you too much though now! (go and see the doctor if they are!!)
Please login to post a reply.
Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!
You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.
Click THIS LINK for full contact details.
For subscription issues please see THIS LINK.