|Garry Martin 1||08/06/2017 08:33:27|
|13 forum posts|
where can I get a piece of brass 85mm dia x 19mm long
have tried everywhere to no avail
18650 forum posts
You will probably have to get 3.5" (89mm) which is a standards size, several of the ME suppliers will sell that cut to length such as College engineering who were top of the list
Edited By JasonB on 08/06/2017 08:41:05
|geoff adams||08/06/2017 08:44:31|
|179 forum posts|
Try metal supermarket they will cut any size dia. will have to machined
|Graham Swales||08/06/2017 17:45:20|
|32 forum posts|
Does it have to be brass and that exact size? I have a number of blocks of aluminium bronze which are around 100mm diameter and 20-25mm thick. Yours for p&p if of any use.
|Ed Duffner||08/06/2017 18:00:58|
|810 forum posts|
There are frequent offcuts of brass to similar dimensions on Ebay, but usually command a price of precious metals.
|Philip D||08/06/2017 18:23:23|
|30 forum posts|
Garry, where are you based ??
|Ian Skeldon 2||13/06/2017 20:50:31|
|487 forum posts|
Don't know if this helps but I went to a materials supplier geared up to supply lots of different stuff in small quantities to lots and various materials and sizes and shapes etc, based in Stoke-On-Trent they're called Noggin End Metals.
As I say I went there today and only spent a few quid but the chap there (I think it was Mike?), asked his good lady to make us both a brew, very friendly and helpful, here is a link **LINK**
Please login to post a reply.
Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!
You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.
Click THIS LINK for full contact details.
For subscription issues please see THIS LINK.