By continuing to use this site, you agree to our use of cookies. Find out more
Forum sponsored by:
Forum sponsored by Allendale July 23rd

What Did You Do Today (2017)

Report what you have been upto here (engineering related)

All Topics | Latest Posts

Search for:  in Thread Title in  
JasonB01/01/2017 07:29:19
avatar
Moderator
16018 forum posts
1684 photos
1 articles

Report what you have been upto here ( preferably engineering related) Actual workshop progress can be reported here

Previous 2016 posts can be found here

Edited By JasonB on 01/01/2017 07:30:18

Edited By JasonB on 02/01/2017 20:25:39

John Alexander Stewart01/01/2017 15:03:38
750 forum posts
51 photos

Getting ready for the yearly Jan1 steamup... Nice and sunny and just below freezing - a nice day!

Here's a link to one a year or two ago:

https://youtu.be/j2RO0z4N0WU

Not sure what will be in steam this year, but will figure it out in a few hours.... JohnS

David Colwill01/01/2017 15:06:12
582 forum posts
32 photos

Started the new year tidy up!

Happy 2017 to all.

David.

Roger Head02/01/2017 00:35:40
209 forum posts
7 photos

Bl**dy hell, David, I haven't finished last year's yet frown.

Roger

Perko702/01/2017 07:32:25
278 forum posts
23 photos

Public running day at the club yesterday, had a few visitors but not as many as a normal day so not too busy. House-hold chores this morning followed by a general tidy-up in the workshop. For JohnS, temperature at 5:30AM today was 27.4ºC (that's about 81ºF) , maximum at 1:30PM around 36º, humidity around 70%, so a bit too steamy for any serious work. The joys of living in the sub-tropics!!

Tractor man02/01/2017 07:58:10
426 forum posts
1 photos
New years day in the shop installing a cctv feed from my home cameras so I can see who's at the door while I'm working. Also servicing each machine as I go along after their enforced slumber for the house move.
bricky02/01/2017 07:59:32
377 forum posts
47 photos

Sorting out my workshop to make more space.I'm finding things I had forgotten I have.I have a workshop 25yds sq and still I am looking for more space.Today I am starting to make a spindle for a dividing head ,the one that I have made already, the MT 2 is 8th over size and will not tighten up my Myford collets.

Frank


richardandtracy02/01/2017 19:16:14
avatar
938 forum posts
10 photos

When my 'new' Clarke CL430 arrived it was missing the tailstock gib strip. Fortunately it's identical to my Warco WMT300, so I copied that. Been wanting to do it all holiday, but yesterday afternoon & this morning I was able to get some time to myself & the workshop was above freezing, so I couldn't procrastinate any longer. So now the CL430 has taken a small step towards its eventual cnc'ing.

Regards

Richard.

Bazyle02/01/2017 20:20:11
avatar
4681 forum posts
186 photos

Jason, in your moderator powers enable it please can you put a link on the end of the 2016 thread to the new one and a back link from the first post on this one. Ditto for the workshop thread.

JasonB02/01/2017 20:29:00
avatar
Moderator
16018 forum posts
1684 photos
1 articles

Your wish is my command, all done.

J

Neil Wyatt02/01/2017 21:05:42
avatar
Moderator
16432 forum posts
685 photos
74 articles

Just for completeness, here's a link to this page:

**LINK**

cheeky

ANDY CAWLEY02/01/2017 21:11:42
143 forum posts
42 photos

Getting shed ready for new to me Ton Senior M1. Thinking of puttin mill and lathe in middle of shed rather than round the sides.

Neil Wyatt02/01/2017 21:43:47
avatar
Moderator
16432 forum posts
685 photos
74 articles

Well as I have done this in the 'office' rather than the 'workshop' I'll report it here - I now have two complete tracks of 187 3D printed links each cool although one of them is in four parts. My left finger tips are coated in a mix of poly cement and superglue and my right finger tips are numb from pushing over 11 metres of 0.63mm wire into tiny holes. Now printing a pair of Mk IV sprockets to be followed by a mere eight pairs of suspension arms.

One or two minor issues so far, that I imagine are common to all 3D printers but no material problems. I really don't want to send this thing back to Dremel!

Neil

Emgee02/01/2017 22:11:13
1157 forum posts
206 photos
Posted by Neil Wyatt on 02/01/2017 21:05:42:

Just for completeness, here's a link to this page:

**LINK**

Neil, why have a page link to the page on the same page as that being read ?

Emgee

Michael Gilligan02/01/2017 22:15:57
avatar
13800 forum posts
599 photos
Posted by Emgee on 02/01/2017 22:11:13:
Posted by Neil Wyatt on 02/01/2017 21:05:42:

Just for completeness, here's a link to this page:

**LINK**

Neil, why have a page link to the page on the same page as that being read ?

Emgee

.

Emgee,

Unfortunately you didn't quote Neil's cheeky

... Surely that cheeky answers your question.

John Alexander Stewart02/01/2017 22:18:42
750 forum posts
51 photos
Posted by Geoff Perkins 1 on 02/01/2017 07:32:25:

... For JohnS, temperature at 5:30AM today was 27.4ºC (that's about 81ºF) , maximum at 1:30PM around 36º, humidity around 70%, so a bit too steamy for any serious work. The joys of living in the sub-tropics!!

Haarrumph.

How are you supposed to complain about frozen feet and frozen feed water pipes if it's that warm??

BTW - a Sweet Pea ran on the track this year; ran just fine, as per the locomotives' usual performance.

Fun stuff, no matter what the temperature!

JohnS.

Neil Wyatt02/01/2017 22:18:46
avatar
Moderator
16432 forum posts
685 photos
74 articles
Posted by Emgee on 02/01/2017 22:11:13:
Posted by Neil Wyatt on 02/01/2017 21:05:42:

Just for completeness, here's a link to this page:

**LINK**

Neil, why have a page link to the page on the same page as that being read ?

Emgee

So people can repost it

If everyone joins in, eventually this page will end up No. 1 on Google.

N.

Michael Gilligan02/01/2017 22:20:56
avatar
13800 forum posts
599 photos

Aha ... it's the latest bit of the Jov[ia]labe

Perko702/01/2017 23:41:19
278 forum posts
23 photos

No problem running steamers in our summer climate, although often it's too dry so the fire risk limits use of live steam on track days. Problem with electric or petrol-driven locos in our summer is they often get too hot so either electronics give up or petrol vapourises before reaching the carby.

Better that than icing up the carby though, and at least there's a breeze while hurtling round the track. smile

John Stevenson03/01/2017 00:04:54
avatar
Moderator
5068 forum posts
3 photos

Not workshop related as the workshop is at the other house and I'm stuck here doing end of year accounts [ unpaid ]

So decided to run the 3D printer.

Got a few conversion jobs coming up this year so decided to print a few type 24 motor covers off to tidy the ends up on the steppers.

Excuse the picture, this camera phone is about ready to give the ghost up I think.

Anyway it makes a nice tidy job.

All Topics | Latest Posts

This thread is closed.

Magazine Locator

Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!

Find Model Engineer & Model Engineers' Workshop

Support Our Partners
Advertise With Us
Eccentric July 5 2018
Warco
Eccentric Engineering
Ausee.com.au
ChesterUK
TRANSWAVE Converters
Meridienne oct 2019
emcomachinetools
Allendale Electronics
Subscription Offer

Latest "For Sale" Ads
Latest "Wanted" Ads
Get In Touch!

Do you want to contact the Model Engineer and Model Engineers' Workshop team?

You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.

Click THIS LINK for full contact details.

For subscription issues please see THIS LINK.

Digital Back Issues

Social Media online

'Like' us on Facebook
Follow us on Facebook

Follow us on Twitter
 Twitter Logo

Pin us on Pinterest