|John Stevenson||07/01/2016 14:12:53|
5068 forum posts
No pie and a pint for a bit.
This got delivered this morning.
PB1 Phossy bronze, 2" OD, 7/8" Id, 30" long
So the quiz, forget the carriage and VAT, how much ?
|Frances IoM||07/01/2016 14:17:55|
|747 forum posts|
3649 forum posts
|187 forum posts|
Not sure if you had to pay extra for the hole, I reckon I would have cost me over 300 squids. But I guess you could pay about 200.
The reason for mentioning the hole was because I was looking for some tube 63.5 OD x 45mm bore, and was quoted £75 per metre. Solid bright was £40 per metre... so it seems holes in metal are Very expensive.
|Michael Gilligan||07/01/2016 14:37:28|
15499 forum posts
Did Martin Connelly's contact buy the bit from the middle ?
Oops, no ... his was PB102
Edited By Michael Gilligan on 07/01/2016 14:41:07
|1031 forum posts|
'bout £120 I'd guess without the VAT and del
Edited By Graeme W on 07/01/2016 14:39:21
|Neil Wyatt||07/01/2016 14:43:54|
17741 forum posts
Knowing John he swapped it for a rusty bit of EN1A down the pub
|Michael Briggs||07/01/2016 14:51:36|
|184 forum posts|
My guestimate is £320, is the hole for a security chain ?
|Chris Evans 6||07/01/2016 14:59:39|
1631 forum posts
£345 I have just scrounged a foot of 1 3/4" from where I used to work, the old boss was feeling generous !
17877 forum posts
Took in in lue of the £2 Ketan owes you
|130 forum posts|
about £140, or more, or less
|jason udall||07/01/2016 16:41:27|
|2023 forum posts|
|2" with 7/8"..contiuous cast|
Well thats about a kilo
Last I looked about ? 15/kg for 1000 kg
|David Clark 1||07/01/2016 17:08:01|
3357 forum posts
2639 forum posts
|78 forum posts|
At Metals 4U a metre of 2" x 1 " bore PB1 bronze tube is £253 so using that as a guide I reckon that bit would be say 210 quid.
|1031 forum posts|
just noticed the typo in my price, more like £220
Edited By Graeme W on 07/01/2016 18:26:56
|Steve Withnell||07/01/2016 19:34:45|
796 forum posts
50p - you persuaded some poor sod that it was a reject sash weight because it had a hole in it
259 forum posts
Two shillings and six pence?
|Rik Shaw||07/01/2016 21:45:18|
1313 forum posts
"Ouch" - is his remark indicating that the purchase price hurt. I gather from the remarks about the OP from people who seem to know him is that he is possibly a bit of a cheapskate (a bit like me!). Which leads me to ask myself what would make me go "ouch" faced with a similar purchase. I would say somewhere between £12-£17.
|Split Pin||07/01/2016 22:24:51|
|10 forum posts|
I paid £227 for 36" of 2 1/4" X 1 1/4" PB1 in June 2014 so should be between £225/250,
Please login to post a reply.
Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!
You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.
Click THIS LINK for full contact details.
For subscription issues please see THIS LINK.