By continuing to use this site, you agree to our use of cookies. Find out more
Forum sponsored by:
Forum sponsored by allandale

Emma Victoria

Dimension change

All Topics | Latest Posts

Search for:  in Thread Title in  
Henry Wood08/09/2015 20:50:37
19 forum posts
1 photos

To builders of Emma-Victoria, in M.E. No.4459 on page 49, the detail of the Eccentric Rod shows a set over of 1" from bearing C/L, this should read 1 1/2" to clear Return Crank swing.


Henry Wood07/03/2016 20:26:14
19 forum posts
1 photos

Hi Bill

You are correct, I did not show any details for both the Pressure Gauge and Injector. If you look back to Part 1 in M.E. 4444, you will see I did make reference to both these items which I do make. With regards to injectors I followed the articles by D.Lawrence in M.E. in year 1975. and achieved success. I do make my own Pressure Gauges, I looked on this as a challenge many years ago and have successfully made a number over the years for my own locos and Traction Engine. Both these items are not what you could say easy to make, for this reason most builders purchase them from our suppliers.

For the Pressure gauge, I suggest you go for 1"dia. with a range of 0-150psi. and for the Injector, a No.3 (14oz/min.) is O.K. Hope this is helpful



All Topics | Latest Posts

Please login to post a reply.

Magazine Locator

Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!

Find Model Engineer & Model Engineers' Workshop

Latest Forum Posts
Support Our Partners
Expo Tools July 14
Eccentric Engineering
Eccentric July 5 2018
SPG Tools October Seventeen
TRANSWAVE Converters
Allendale Electronics
Subscription Offer

Latest "For Sale" Ads
Latest "Wanted" Ads
Get In Touch!

Do you want to contact the Model Engineer and Model Engineers' Workshop team?

You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.

Click THIS LINK for full contact details.

For subscription issues please see THIS LINK.

Digital Back Issues

Social Media online

'Like' us on Facebook
Follow us on Facebook

Follow us on Twitter
 Twitter Logo

Pin us on Pinterest

Visit the Model Engineer
Exhibition website

Model Engineer Exhibition