By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for geoff walker 1

Here is a list of all the postings geoff walker 1 has made in our forums. Click on a thread name to jump to the thread.

Thread: Drummond / Myford M Headstock Bearing
23/06/2018 19:28:47


Go to the drummond web site and SEARCH "m type poor finish cured" in BOTH the files and the photos.

They explain option 2 in detail, "Eugenes bearing dodge".

I've done it and it helps a lot with end float adjustment of the spindle, highly recommended.

Details of the bearing you need is in the drummond file.


Thread: The Workshop Progress thread 2018
22/06/2018 09:51:08

It runs very well Jim, a lovely model, excellent detail.

Just looking at the flywheel which I assume is cast iron, super outer rim finish, what's the secret?

What does a stroke of 15mm by 20mm mean?


Thread: What did you do Today 2018
21/06/2018 19:15:13

Thanks Brian,

Check your b.s.p. tap and dies before you start.

I didn't and had to buy a couple of carbon steel ones from Tracy Tools.


21/06/2018 13:33:02

Finished me Stuart pump today, very pleased. First casting I bought from Stuart, gun metal, lovely stuff a joy to machine. Only problem is that 90% of the work is setting up the casting the actual machining is done in no time. That's the nature of castings though, can't just stick 'em in a chuck. I've created a photo file if anyone is interested. Geoff


21/06/2018 13:12:12

Take care Ady, unnecessary movement in old age, we must be careful we don't damage anything, especially the lead screw?


Thread: Mogens Kilde's Double Diagonal Engine
20/06/2018 20:12:49

Very nice Chris, love the scale, so much patience needed making detailed parts that size.

Not to mention good eyesight and non arthritic fingers.

I love the parade of parts as well.

Great stuff Geoff

Thread: Boll Aero
19/06/2018 15:20:43

Graham there is another thread in this forum, have you read it, may help you.

Keywords Bollaero glow plug engine


Thread: simple oscillating engine theory
18/06/2018 21:23:10

But at 1degree either side it will be open so you don't want the piston in the way.

Yes I think you're right there Jason, just checking myself and it's a good 30 degrees before the piston fully clears the port on the down stroke.

Thankfully the solution is simple just shorten the con rod.

thanks again, great simulation, and I'll keep you posted Geoff

18/06/2018 19:06:47

Hi Jason

Geoff, Muncasters drawing (not Westbury's) shows the end of the piston half way across the port when at TDC.

Yes I do have Muncasters book and I can see he has the piston half way across the port hole. The problem I have is that if you take his piston rod length of 1 and 15/16" from the centre of the crank pin to the end of the piston you can't make it fit unless it overlaps the port hole, that being off a 0.486" throw.

JDW also has the piston lapping half way over the port hole.

I may well just shorten the con rod and have it overlapping half way. I was keen to stick as much as possible to the Muncaster sizes but may have to compromise.

thanks for your help Geoff

18/06/2018 18:27:23

Hi All

When the piston in a single acting simple oscillating engine is at tdc is there any guidance I can use as to where the top of the piston should be relative to the inlet/outlet port in the cylinder.

When should the upward travel of the piston stop, just below, over, or just beyond the port hole.

I of course understand that the piston must not block the port hole when the hole is aligned with either the inlet or exhaust on the standard.


Thread: The Workshop Progress thread 2018
16/06/2018 16:10:54

Hi Thanks for that Jason,

I'm currently doing a CAD drawing for the whole model and from it I could see with a 7/16" stroke the hole centres were closer together. I made it 0.165" so with 2mm holes it would leave just over a 2mm space in between them.

I will look at 0.486 I think there is just enough room to accommodate a slightly longer stroke of around 15/16" to 31/32".

thanks again for your help


16/06/2018 14:47:40

Hi All

Just completed the pillar and and base for a small Muncaster engine.

Many of you will know that the Muncaster engines were covered by E.T. Westbury in a series of M.E. articles back in 1957. This engine is the simple single oscillator which commenced the series.

Could I ask has anyone made this model to the Westbury/Muncaster sizes and if so what stroke did you use. Neither Westbury or Muncaster specify a stroke for the engine. Using the scale on the Westbury scale drawings it appears the crank has a throw of approximately 7/16" so the stroke I estimate would be 7/8".

Any feedback would be appreciated

Thanks Geoff


Thread: Machining a cast wheel what do you grip first?
13/06/2018 19:42:14


Tubal cain video on you tube shows how to machine a stuart progress engine flywheel.

Might be of interest to you, it's in part 3

Google making a stuart progress engine and you will find it.


Thread: small cast iron flywheel
12/06/2018 16:18:47

Hi All

Well I now have the flywheel I was looking for, bought from Stuart models last week.

It is the one used on the progress model and should machine down ok to my upper limit of 60mm.

It's not listed on the Stuart website on the flywheel page but is available to buy separately.

I thought it was bit expensive but having said that I'm glad I bought it last week as Stuart have just put their prices up.



Thread: Jones .605 Glow engine
10/06/2018 19:42:14

Well done Keith,

.That's an impressive test stand as well


Thread: bearings
10/06/2018 19:39:35


simply bearings have a great range of bearings, may have what you need.


Thread: The Workshop Progress thread 2018
07/06/2018 07:05:32

Yes, agree with Neil. Really nice work, caught my eye this engine, unusual. Well done Jim.

Thread: small cast iron flywheel
02/06/2018 08:12:10

Gentleman, thank you for all your replies on this post, lots of good ideas/advice.

When I finish the model, a simple oscillator I will post a picture.

Thanks again Geoff

31/05/2018 22:16:35

Take the plunge and make from solid ?

Well that's an option Chris but lately alI I seem to be doing is sawing big lumps of cast iron, I'm sick of it mate!!!!!

No I'll make a pattern and have one cast up if I can't source one on the internet.

Still looking gents can anyone help

cheers Geoff

31/05/2018 21:34:39

Hi All,

I'm looking for a small cast iron flywheel but having tried all the usual sources am unable to find what I want.

Ideally cast iron, five or six straight spokes, between 50 and 60 mm diameter with a face width of 8 to 10 mm. 75 mm diameter is too big.

Best I can find is the stuart progress flywheel at 2 1/2 " but that seems to be unavailable from them at the present time.

Reeves have a gunmetal one for the nicholas engine. This has curved spokes and would be ok but I would prefer cast iron.

Can anyone help, many thanks in advance


Magazine Locator

Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!

Find Model Engineer & Model Engineers' Workshop

Support Our Partners
Meridenne Boat 2019
TRANSWAVE Converters
Eccentric July 5 2018
Eccentric Engineering
Allendale Electronics
Subscription Offer

Latest "For Sale" Ads
Latest "Wanted" Ads
Get In Touch!

Do you want to contact the Model Engineer and Model Engineers' Workshop team?

You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.

Click THIS LINK for full contact details.

For subscription issues please see THIS LINK.

Digital Back Issues

Social Media online

'Like' us on Facebook
Follow us on Facebook

Follow us on Twitter
 Twitter Logo

Pin us on Pinterest