By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for bernard towers

Here is a list of all the postings bernard towers has made in our forums. Click on a thread name to jump to the thread.

Thread: Myford extension for spindle.
31/05/2021 22:16:12

I’ve got one of those, always assumed it was Myford it’s accurately made and have used it on the mill in various ways

Thread: Inexpensive inverter mig welders
29/05/2021 11:40:39

Sorry but no such thing as a good cheap mig welder, reliable current and wire speed control come at a premium!

Thread: Injector LBSC type
29/05/2021 11:37:44

+1 for Dag Browns book, well written all processes done step by step and the reasons why. Really interesting project and yes the work.

Thread: Mitutoyo Digital Callipers
26/05/2021 21:38:39

My caliper did the same as the first post so rang MIT and they supplied me with a new reader head for £40, job done good as new.

Thread: Boiler lagging
24/05/2021 11:20:56

If it’s kaowool I split mine down on my DNY so it is about 5/32 thick.

24/05/2021 11:20:55

If it’s kaowool I split mine down on my DNY so it is about 5/32 thick.

Thread: Bearings Online (Based in Scotland)
24/05/2021 11:08:15

Used them 3 weeks ago, all ok

Thread: The worst 'upcycling' tragedy ever?
24/05/2021 11:06:02

Hacksaw, you made me smile

Thread: Practice material for a newbie
24/05/2021 11:04:08

Why not steel?. Get yourself some EN1A leaded and some brass/ Ali 6082 T6. You will find Delrin/Acetal quite expensive but nice to work with. Macc Models are a good supplier

Thread: Stent T&C Refurb (also need Wiring Help)
21/05/2021 23:17:42

You only need cutter holders with round holes the size of the corner dims and 1 grubscrew to hold it in place. Or go the whole hog and dump the main shaft and make a new one with er collets then problem solved.

Thread: Boxford countershaft part required
20/05/2021 15:14:58

I assume when you say it broke that it is just in two pieces so why not repair it ( silver solder/ bronze weld) your comics are many, and if it’s only temporary put the lathe together and make a new one.

Thread: Any info on this?
19/05/2021 21:31:24

BT ENGINEERINGused similar devices not with chain but wire rope and had portable tripods from which it was centrally hung. I think it was for large carriageway/ footway cover lifting

Thread: Pillar drill motor size?
18/05/2021 14:28:37

Drilling holes is about how sharp your drill just as much as horsepower and for stainless how slow can you get down to.?

18/05/2021 14:28:37

Drilling holes is about how sharp your drill just as much as horsepower and for stainless how slow can you get down to.?

Thread: 30 hour clock electric winder
18/05/2021 14:25:36

There’s a bit on electric winding in his turret clock book ,I used it as the basis for mine using more modern encased tilt switch

Thread: 45% Silver Solder for Jewelry?
14/05/2021 23:52:50

Of course what you must remember is that although the solder ingredients before use are not necessarily what is left after the joint is made some is burnt off. Best ask Keith Hale about that.

14/05/2021 23:52:12

Of course what you must remember is that although the solder ingredients before use are not necessarily what is left after the joint is made some is burnt off. Best ask Keith Hale about that.

Thread: Recommended Beginners Measuring Tool Set
14/05/2021 23:46:08

Regarding the auto dot punches they do move as it does two operations to mark the material, I made the one from a 1940’s model engineer which is semi auto. The operation of it means that you preload it before putting the point on your material then press the button for marking, this gives no recoil = no movement. The body is quite chunky but it works.

Thread: Shortening HSS drills
14/05/2021 23:36:20

Shortening jobber drills is ok for the odd job but they still flex as the shank is soft where the true stub drill is all hard

Thread: How to countersink on a Mill?
11/05/2021 22:20:43

I believe single hole demurrers/ counter sinks are elliptically sharpened

Magazine Locator

Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!

Find Model Engineer & Model Engineers' Workshop

Latest Forum Posts
Support Our Partners
Warco
rapid Direct
JD Metals
walker midge
cowells
Eccentric July 5 2018
emcomachinetools
Eccentric Engineering
Subscription Offer

Latest "For Sale" Ads
Latest "Wanted" Ads
Get In Touch!

Do you want to contact the Model Engineer and Model Engineers' Workshop team?

You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.

Click THIS LINK for full contact details.

For subscription issues please see THIS LINK.

Digital Back Issues

Social Media online

'Like' us on Facebook
Follow us on Facebook

Follow us on Twitter
 Twitter Logo

Pin us on Pinterest