By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for Tony Pratt 1

Here is a list of all the postings Tony Pratt 1 has made in our forums. Click on a thread name to jump to the thread.

Thread: E10 Petrol
21/07/2021 12:31:43

So will this new E10 petrol 'go off' even quicker than E5?

Tony

Thread: Aluminium
19/07/2021 13:35:59

Looks good for a motorbike seat.

Tony

19/07/2021 12:34:15
Posted by ChrisB on 19/07/2021 11:36:54:
Posted by Dave Smith 14 on 19/07/2021 08:53:49:

1050 is no use for anything except foil and labels being pure Aluminium.

Where did you get that from?!

Chris B, I also would like to see the data.

Tony

Thread: Lower back issues
18/07/2021 13:03:37

A PSA test might save your life, I'm quite happy to be tested for anything & it's free at point of use.wink

Tony

Thread: English members who have moved to France.
18/07/2021 09:24:41

All I can say is why? Seriously make sure your head rules your heart or else you could end up in deep s***, I know a few.

Tony

Thread: Tool post height
08/07/2021 15:26:58

Never had a problem unless I didn't tighten it up properly, yes they do have overhang but in practice they are more than rigid enough for our purposes. Even used them on Haas CNC lathes.

Tony

08/07/2021 13:54:10
Posted by Roderick Jenkins on 08/07/2021 13:50:14:

Lots of "theory" on here about the lack of rigidity of QCTPs. I have never had a problem with mine on my S7. I have a Gibraltar post and have only ever used that with a boring bar that is too big for the tool holder (and for my J&S knurling tool which has a shank which is too big).

Rod

I agree, if you tighten a QCTP correctly there should be no problem with lack of rigidity.

Tony

Thread: re-magnetising magnetic base
07/07/2021 15:01:39

Never heard of a re-magnetising service, if the useless one is a far eastern object it may have been cr*p from the start & a similar replacement could be the same? Back in the day Eclipse etc were decent items.

Tony

Thread: Tool post height
06/07/2021 17:17:31

Much easier to mill the tool base.

Tony

Thread: Live Centre For A Boxford?
06/07/2021 15:24:39

Just had a quick look at APT & the good news is they quote a TIR so their product would have to meet that easily checkable spec, other sites just quote 'precision' with no figures to guide you, also stub point should be more rigid as they are shorter.

Tony

Thread: Shock at low pay for high skill
05/07/2021 20:37:02

I also believe the railways/underground are highly unionised?

Tony

05/07/2021 17:49:04

What constantly amazes me is the wage train drivers seem to get.

Tony

Thread: Universal thread cutting
05/07/2021 13:57:03

JasonB, Yes you have to keep the half nuts engaged at all times if cutting imperial threads on a metric lathe or vice versa.

Tony

04/07/2021 19:46:29

If you want a lathe to cut imperial/metric threads at the touch of a button look no further than the ELS by Clough42, many of us have gone down this route. Can't comment on your Mars landing reference, but CNC will do more or less anything you want if you have the knowledge & funds.

Tony

Thread: Strimmer /BrushCutter any recommendations ?
02/07/2021 22:17:08
Posted by Henry Brown on 02/07/2021 21:08:29:

Probably depends on the depth of your pocket, My cousin gets through three a year and will only buy Still, they are used five days a week in his gardening maintenance business.

Jeez what the hell is he doing to them?🤔

Tony

02/07/2021 22:17:03
Posted by Henry Brown on 02/07/2021 21:08:29:

Probably depends on the depth of your pocket, My cousin gets through three a year and will only buy Still, they are used five days a week in his gardening maintenance business.

Jeez what the hell is he doing to them?🤔

Tony

Thread: Surface finish when turning.
02/07/2021 08:41:41

Robin, just saying I have seen that effect before & on 3 phase m/c's. If you get that effect on deeper cuts you can rule out the skin issue.

Tony

Thread: See Through Carb
02/07/2021 08:38:21

Bookmarked to look at later, lots of bl**dy adverts on YouTube these days.

Tony

Thread: Model Engineer's Auction
02/07/2021 08:35:22
Posted by Paul L on 02/07/2021 08:28:48:

It looks to me as the successful bidders will pay the hammer price plus buyers premium plus vat on the whole amount.

so the myford lathe at £1200 would cost £1656. anyone else read it that way?

I'm sure all auctions work in a similar way.

Tony

Thread: Rockwell hardness of collets
02/07/2021 08:31:54

I'm with Michael G, 44-48 Rockwell C is not hard at all. The cynic in me is thinking that these specs are just pie in the shy anyway, a lot of the tooling ads state 'facts' which don't make a lot of sense.

Tony

Magazine Locator

Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!

Find Model Engineer & Model Engineers' Workshop

Latest Forum Posts
Support Our Partners
walker midge
Warco
emcomachinetools
cowells
Eccentric July 5 2018
rapid Direct
JD Metals
Dreweatts
Eccentric Engineering
Subscription Offer

Latest "For Sale" Ads
Latest "Wanted" Ads
Get In Touch!

Do you want to contact the Model Engineer and Model Engineers' Workshop team?

You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.

Click THIS LINK for full contact details.

For subscription issues please see THIS LINK.

Digital Back Issues

Social Media online

'Like' us on Facebook
Follow us on Facebook

Follow us on Twitter
 Twitter Logo

Pin us on Pinterest