Here is a list of all the postings Mark P. has made in our forums. Click on a thread name to jump to the thread.
|Thread: Hemswell Cliff, Lincs|
Adrian, every time I've been there's been nowt there.
|Thread: Making a Silicone Soldering Brush|
Just seen some silicone nail art brushes on ebay, various sizes and prices.
Edited By Mark P. on 01/06/2019 18:42:17
|Thread: Drill bits|
Loads on ebay.
|Thread: What do YOU call it?|
I call it bimbling.
|Thread: Threading 1/8 stainless steel|
Try opening your die up a smidge for the first pass.
|Thread: Small head metric hexagon bolts and nuts|
Thanks Brian, I did have a look at their website but couldn't see any.
I have heard about the German company but like you I can't remember the name.
I've tried ebay and EKP but no joy, EKP will make them but need to buy 1000+.
Regards Mark P.
Hello all, is there anywhere that sells smaller than standard head metric bolts and nuts in m5 m4 & m3 etc . I know that I can get one size smaller ba ones but I should like scale sized metric ones.
Regards Mark P.
|Thread: What Did You Do Today 2019|
Strimmers, instruments of the devil!😈
|Started to tidy up and rearrange the workshop with the idea of making a bit more room.... not getting on very well. I had a pile of stuff that I decided I was going to take to the tip, pile got smaller!|
|Thread: 3-in-1 Metalworking Machines|
|John, we used to bend up a 'shoe' to go on our one at work to increase the radius.|
|Thread: Sealing water tanks|
|I've had good results with automotive panel sealant, apply with a brush.|
|Thread: Best value parting tool for mild steel?|
|I've had good results with the Tee shaped HSS cobalt parting blades. Used them on stainless, ally, mild steel abd brass, easy to resharpen and cheaper than carbide tips.|
Regards Mark P.
|Thread: Drill sharpener|
|Hi, not wanting to hijack this thread but has anyone tried,got or used the Drill Doctor? If so what was your opinion?|
|Thread: How far to be off tool centre before a turned finish becomes poor?|
|Ross, cut up some drinks cans or bean tins for shims.|
|Thread: Hi all from Lincs.|
|Now then Coggy, I'm in Lincs too, out towards Mablethorpe.|
|Thread: Nickel plating|
|Don't forget to dangle your bits to be plated off titainum wire.|
|Thread: Milling power feed|
|I second Tims idea of using a DC motor, I used a windscreen wiper motor and toorhed belts when I motorised mine.It worked well.|
|Thread: Come on you clever people|
|Ivy, the R.O.C. was the Royal Observer Corps. During the cold war they would monitor fallout from a nuclear bomb etc.|
|I'm only guessing but could it be something to do with the now stood down R.O.C, maybe some sort of fallout sampling and transmission gear?|
|Thread: WARCO WM-250 lathe family and WM16 mill - 001|
|Hi Howard, these are for a project I am doing, the ones for my lathe fill the bill so I wanted a set from a defunct lathe. My thinking was that they would work out cheaper second hand.|
Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!
You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.
Click THIS LINK for full contact details.
For subscription issues please see THIS LINK.