By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for Trevor Drabble

Here is a list of all the postings Trevor Drabble has made in our forums. Click on a thread name to jump to the thread.

Thread: Battleship Grey
31/07/2020 15:52:48

Sorry , that should read model surface warship association . DURR !

31/07/2020 14:30:06

Floyd , Have you tried asking any of the model warship manufacturers such as say Deans Marine , Airfix or Fleetscale ? In addition there's also the Scale Model Warship Society . Trevor. 

Edited By Trevor Drabble on 31/07/2020 14:31:22

Thread: cutting upholstery foam
31/07/2020 14:20:26

Hot wire foam cutter . Plenty on Amazon as your starter for 10 , or model aircraft suppliers such as say Leeds Model Shop ( no connection ) .

Trevor.

Thread: DYMO labels [safe removal] ... what method ?
19/06/2020 20:50:04

Michael,

I can supply you with a small bottle of Axminster Tools , Goo Gone , part number 477112 . If of interest , please PM me your details .

Trevor.

Thread: record no 22 vice jaw replacement
15/06/2020 14:35:05

Cromwell Tools supply replacement jaws ( part no SEN 5671040K ) to suit their 100 m/m vice at £24.60/pr + VAT .

Thread: WANTED: Clockwork mechanism
07/05/2020 23:28:52

At the start of the indoor model section at the annual Lincolnshire Steam rally which is held in August , there's normally a chap with stall selling all manor of Meccano parts , including clockwork motors , which may be capable of being adapted . Although I don't have any contact details for him , maybe the show organisers , or even the local model engineering club , who also attend will .have.

Another option would be the Meccano Guild .

Meccanoman has a number of clockwork motors for sale . 

Hope this all helps.

Edited By Trevor Drabble on 07/05/2020 23:39:34

Thread: Diesel horn
27/11/2019 22:14:43

Mtronics in Yorkshire also have some interesting products in this area . Certainly not the cheapest but good and with after sales service too. No connection with company , just a satisfied customer .

Trevor.

Thread: Record 25 vice handle
13/11/2019 18:24:11

Andrew , Have you tried talking with Irwin , the owner of Record , either for the spec or maybe even a complete replacement handle ?

Trevor .

Thread: 'Bristol Handles'
02/11/2019 11:17:03

Have previously used Cotel Mouldings of Burnley . Large range of industrial quality products . No connection with the company .

Thread: Milling Machines - Myford vs Sieg
29/10/2019 18:54:18

Mike ,

I am sure I've got a hard copy of the manual . I am not computer literate , but will try to take pics of it with my Amazon Fire tablet so I can email them to you if you would care to send me a PM with your email details .

Trevor.

Thread: Tingling from Myford Super 7
07/10/2019 13:07:48

I have used Kraus + Naimer switches successfully for a number of years . They have a huge number of switching options and have proved very reliable . Suggest you get out a qualified electrician to fully check out and test not only your existing installation a.s.a.p. but also to wire any replacement switch and then re-test once installed. . Hope this all helps .

Thread: Question from a customer
06/10/2019 14:03:36

Fizzy , In principle , l agree with you , assuming the boilers are designed and tested for a working pressure above 30 psi . Such pressure reversals is how both our porous load and instrument sterilisers worked every day . I would also wish to offer the following constructive comments ,

1) The end caps on the boilers are wrong . They should at least be flat ( depending on design calcs ) , or preferably convex , but certainly not concave as shown .

2) The steam header is wrong for effective balance . Rather than having a single central take off , there should be two teed take offs , each preferably spaced one third of the length along the header with each tee feeding a smaller short header , and then a single centrally placed teed feed to the engines .

Trevor

Thread: Wanted: Shaper
06/10/2019 13:31:43

James , would suggest you have a word with David at Quillstar . He is currently advertising both a bench mounted shaper as well as a floor standing unit . I have no connection with the company . Good luck . Trevor.

Thread: Silent compressor problem
24/09/2019 23:14:20

Have you tried talking to Bambi in Birmingham ?

Trevor.

Thread: Water Lifter Hose
19/09/2019 15:25:07

As per Jason's suggestion , Blackgates also sell a selection of suitable hose in different diameters.

Trevor.

Thread: Spring Tapping Guide
14/09/2019 11:06:25

Vic , Are the ones from Arceuro not suitable ?

Trevor.

Edited By Trevor Drabble on 14/09/2019 11:07:22

Thread: Heartbroken!
16/08/2019 16:19:54

My suggestion would be either carbide drill from M A Tooling on Attercliffe in Sheffield on 07973843152 or a carbide burr from J B Cutting Tools in Dronfield on 01246 418110 . I got some minature burrs from J B at last year's Midlands show , and they are very good . Also , if you visiting Meadowhall in the near future , Took Shed in The Lanes has a small stock of Proxxon carbide burrs . Hope t all helps . Please post your progress so we may all learn . Trevor.

Thread: Tracy Tools
11/08/2019 23:42:34

Paul , Good to hear there are a number of such good companies out there in these turbulent times . Would you care to share details of those you would recommend please in order that both the rest of us and they may potentially benefit ?

Trevor.

11/08/2019 07:44:18

Just want to praise Tracy Tools for their excellent service . Ordered a couple of taps from them around lunchtime on Friday and they arrived by first class post on Saturday . I believe such companies deserve all the support we can give them both directly and at the shows .

Trevor.

Thread: Locking Levers
07/08/2019 11:34:31

Vic , Thanks for the valuable info . Have bookmarked the page . Trevor

Trevor.

Magazine Locator

Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!

Find Model Engineer & Model Engineers' Workshop

Latest Forum Posts
Support Our Partners
EngineDIY
Eccentric July 5 2018
Warco
ChesterUK
emcomachinetools
cowells
Eccentric Engineering
Subscription Offer

Latest "For Sale" Ads
Latest "Wanted" Ads
Get In Touch!

Do you want to contact the Model Engineer and Model Engineers' Workshop team?

You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.

Click THIS LINK for full contact details.

For subscription issues please see THIS LINK.

Digital Back Issues

Social Media online

'Like' us on Facebook
Follow us on Facebook

Follow us on Twitter
 Twitter Logo

Pin us on Pinterest