By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for David Clark 1

Here is a list of all the postings David Clark 1 has made in our forums. Click on a thread name to jump to the thread.

Thread: Sharpening Lathe Tools
28/10/2015 18:28:46

Hi there Aluminium oxide wheel as close to A60K5V as you can get. You could go down to 46 grit but I suggest you don't go finer to 80 grit.

Thread: Model engineering beginner: My first build
27/10/2015 09:35:10

alanstepney.info details some of the errors found in locomotive drawings.

Thread: The Ass is out of the stables
26/10/2015 17:56:45

I see there is a book about making a sub machine gun as well. Surely this legislation will tell everyone that it is possible to make or modify a gun? Also the act seems to say modify the replica. Does it say you can't make one by scratch building it?

Thread: THE 2016 MODEL ENGINEER EXHIBITION
26/10/2015 14:16:55

As the Midlands Model Engineering Exhibition is in October Is this an attempt to get people in before this?

Thread: Members' profile
26/10/2015 12:16:11

Thanks Neil, now updated.

26/10/2015 08:30:21

I filled my profile in. Trouble is it is out of date and I can't see how to change it. Any ideas welcome. It says I am editor of Model Engineers Workshop. correct at time of writing it but incorrect now.

Edited By David Clark 1 on 26/10/2015 08:34:46

Thread: What did you do today (2015)
25/10/2015 17:17:08

Nobody would bother driving through.

Thread: digital caliper
24/10/2015 14:08:44

The Mitutoyo are very good. I can't ever remember a battery going flat in one while you have to keep changing batteries in the cheap ones.

Thread: Suffolk Dredger cylinders
23/10/2015 08:34:20

If you don't get a reply soon, I might be able to dig out the drawings. I think some of them are marked up with the wrong scale.

Thread: Myford lathe values.
22/10/2015 21:15:01

Get the book freedom is more than a seven letter word by Veronica Chapman. You could do him personally for wronging you. You could easily get say, £100,000 as you can decide what compensation he has to pay out of his personal pocket. Nothing to do with his legal companies but for the stress he has caused you. Cost you less than £10 on Amazon. Money well spent for lots of financial problems.

Edited By David Clark 1 on 22/10/2015 21:17:02

Thread: Where to Buy ?
22/10/2015 08:48:04

I would look for a good second hand one from a bereavement sale or similar. Probably half the price of a dealer one. They are about because where else do the dealers get them?

Thread: Myford lathe values.
22/10/2015 08:43:48

If it is wages can you get the DHSS or job centre to intervene?

21/10/2015 17:11:46

Is it a limited company?

Thread: Salvage squad
21/10/2015 14:34:48

It is shown on my all to be recorded list as 3am on Thursday.

Salvage Sqaud has been on for weeks. I have been waiting for the tin turtle one. I have seen it before but would like to watch it again.

Edited By David Clark 1 on 21/10/2015 14:36:29

Thread: Myford lathe values.
21/10/2015 14:32:34

Perhaps you could post a photo?

Thread: Salvage squad
21/10/2015 12:41:57

Salvage squad is on Quest at 3am on Thursday. The team restore a narrow gauge locomotive. I think it is a world war 1 tin turtle.

Thread: MEW 234
20/10/2015 11:44:31

Hi KWAL Two wrongs don't make it right!

Thread: Clarkson Autolock vs ER collets
19/10/2015 13:51:51

We had imperial and metric collets for Clarksons. The metric has a ring around the upper part outer diameter. The shank sizes of cutters were either imperial or metric but the thread was the same pitch but different diameter.

Edited By David Clark 1 on 19/10/2015 13:53:51

Thread: ER25 collet chucks that fit a myford spindle nose
19/10/2015 13:45:25

Best bet is to make or use a chuck backplate and turn register to fit the backplate. If you use a larger backplate you could add holes in the diameter to take a tightening rod.

Thread: ARC - PayPal and Credit Cards
19/10/2015 07:11:29

Hi Ketan A lot of companies on the Internet ask you to fill in an online form. They do not use a secure gateway. I Have no problems with ArcEuroTrade. Regards David

Magazine Locator

Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!

Find Model Engineer & Model Engineers' Workshop

Latest Forum Posts
Support Our Partners
JD Metals
Warco
cowells
emcomachinetools
walker midge
Eccentric July 5 2018
rapid Direct
Eccentric Engineering
Subscription Offer

Latest "For Sale" Ads
Latest "Wanted" Ads
Get In Touch!

Do you want to contact the Model Engineer and Model Engineers' Workshop team?

You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.

Click THIS LINK for full contact details.

For subscription issues please see THIS LINK.

Digital Back Issues

Social Media online

'Like' us on Facebook
Follow us on Facebook

Follow us on Twitter
 Twitter Logo

Pin us on Pinterest