By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for Mark Gould 1

Here is a list of all the postings Mark Gould 1 has made in our forums. Click on a thread name to jump to the thread.

Thread: T slot cutter of woodruff cutter?
03/03/2020 16:53:43

Here is Grahams drawing, I hope he doesn’t mind me posting it here. It clearly shows the 60mm long slot which has to be milled out. 
 

984460b3-ffd6-40a9-9bb1-1cdc9ebfebb8.jpeg

Edited By Mark Gould 1 on 03/03/2020 16:56:00

03/03/2020 16:40:40

Gents,

I am making a spindle lock for my Emco FB-2 milling machine. I am using Graham Meeks design which is made from a single piece of metal. I am using EN1A.

Grahams design has a long slot which carries the actual locking piece. My question to you is, should I be using a t slot cutter or a woodruff cutter? I am unsure what the difference is between these 2 cutters.

Thanks in advance for any help,

Mark

Thread: Drill sharpeners
18/02/2020 06:48:40

Bill, I've seen a couple of the Picador attachments on Ebay recently. Perhaps worth a go. Thanks for the info. I will try free handing first.

Clive, yes similar to that first one you posted. A lot of variations on a common theme. That Kaindl looks nice too but is probably eye watering expensive. The Scheppach (sounds German but isn't) one looks to similar but them a lot cheaper. I have a Scheppach 1 inch belt sander which despite its price has done a lot of good work so far. Your Clarkson sounds like the business I will dream on!

Duncan, yes, thats the plan for the moment. Thanks, scribing a line is a good idea.

Mark

17/02/2020 21:09:37

JohnF,

I am in the Netherlands so that won't work but many thanks for the offer. I have just been looking on youtube (where I learn most things these days) and will tackle a drill or two next week when I have some time. The range of the drills I want to keep is probably from 8mm up to 12mm.

I'll look at the gadgetbuilder.com site, thanks John Baron and the others who have chimed in. Much appreciated.

Mark

Thread: Stuart No. 1 Build Progress
17/02/2020 20:38:14

125c1e82-bebe-449d-8ab9-9f9ccef4dff9.jpg

img_2724.jpg

img_2725.jpg

17/02/2020 20:27:58

I keep forgetting to uploads the pics. We have basically completed the Stuart No. 1 but I forgot to take a photo of it in all its glory. We have run in on compressed air without piston rings or gaskets and yet it runs nicely. There's probably some more tweaking of the eccentric to be done to make it run even better but thats something I will have to look into.

img_2749.jpg

fdb5fa78-00ff-47d7-b416-fbb66eeb93c5.jpg

img_2827.jpg

img_3603.jpg

img_3604.jpg

Thread: Drill sharpeners
17/02/2020 20:03:56

Now thats encouragement! I will give it a go. I have a decent bench grinder with good stones so any failings are squarely on me
Thanks,

Mark

17/02/2020 18:51:04

Gents,

I have a lot to learn and it will be some time before even my questions make it out of the Beginners section, let alone my answers.

So with this question: my father and I have a lot of drills. Some he has had for 50 years and I don’t want to replace them. I can take them to be sharpened but this in a pain in the ar$e. I have therefore been looking at a drill sharpener. Not the Drill Doctor ones but one step up from there. As with Chinese lathes etc. they come in a variety of packages and colours but are essentially the same machine. They have a lid on the front which contains a set of ER20 collets.

Can anyone tell me if this is a wise buy? Or is the Drill Doctor just as good? I looked on youtube and I must admit the DD didn’t exactly inspire me with confidence.

Thanks again all,

Mark

Edited By Mark Gould 1 on 17/02/2020 18:51:34

Thread: The Workshop Progress Thread 2020
16/02/2020 22:11:43

We had a maintenance day today and yesterday. Took the complete table off our FB-2 and cleaned the X and Y axis leadscrews, nuts, gibs and ways. Put it all together and adjusted the backlash out. Also completely cleaned 3 chucks and gave the S7 a good spa day. Replaced the felt wiper, oiled everything and got her looking like new again.

Feels good!

Thread: Tapping drill sizes?
11/02/2020 14:05:05

My Dad said I bet you'll have a decent answer within 10 minutes and you gents came through...again. Many thanks for explaining this to me. There's a lot to learn here.

Mark

11/02/2020 08:40:34

Gents,

Can anyone tell me why the tapping drill size for 3/8 BSP is over 15mm? I thought I had a basic grasp of tapping drill sizes but a hole over half an inch for a tap under half an inch doesn’t add up in my (newbie) head.

Many thanks,

Mark

Thread: Metric V Imperial Measurement
09/02/2020 19:53:22

I work in aviation and we use knots, Mach, feet, nautical miles, statute miles, meters, liters, US gallons you name it. A right mess!

Thread: I my goodness
30/01/2020 23:04:43

A good weekends work. Rise early and skip lunch, you might just make it

Thread: Has anyone watched this Girl
18/01/2020 23:58:18

She did a great video on parting and for a complete newbie like me it was a revelation. Parting was always my arch nemesis. I’m still not an expert but have become better at eliminating the variables that cause parting woes. Thanks to Blondihacks.

18/01/2020 21:18:23

She is very well spoken too, like Lyle Petersen is. And obviously intelligent and capable. Whats not to like?

Thread: Magnetic chucks
13/01/2020 02:16:29

Michael,

Thanks for the follow up. An interesting read. I’ll continue to keep an eye on magnetic chucks, maybe next Christmas

Mark

Thread: Piston size?
10/01/2020 16:34:11

Bugger I knew I had replied too fast

Thanks Jason

10/01/2020 15:51:34

Sorry to bother you again gents, but would this be the o-ring to use? The thing I wasn’t sure about is the OD which is 44mm. Seems tight for a 2 inch bore?

https://simplybearings.co.uk/shop/p512731/BS224-3.53mm-Section-44.09mm-Bore-VITON-Rubber-O-Rings/product_info.html

Thread: Magnetic chucks
10/01/2020 15:31:53
Posted by KWIL on 10/01/2020 12:24:51:

Mark,

What price? I might like to experiment.

@KWIL, he wants €175 for it. Let me know if you are interested, I could possible haggle him down a tad.

Thread: Piston size?
10/01/2020 13:27:31

Thanks Hopper, I will try the Viton o-ring first though. Our second Stuart is already waiting to be built so I’ll archive your advice.

Magazine Locator

Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!

Find Model Engineer & Model Engineers' Workshop

Latest Forum Posts
Support Our Partners
Eccentric July 5 2018
emcomachinetools
cowells
EngineDIY
Warco
ChesterUK
Eccentric Engineering
Subscription Offer

Latest "For Sale" Ads
Latest "Wanted" Ads
Get In Touch!

Do you want to contact the Model Engineer and Model Engineers' Workshop team?

You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.

Click THIS LINK for full contact details.

For subscription issues please see THIS LINK.

Digital Back Issues

Social Media online

'Like' us on Facebook
Follow us on Facebook

Follow us on Twitter
 Twitter Logo

Pin us on Pinterest