By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for Brian Sweeting

Here is a list of all the postings Brian Sweeting has made in our forums. Click on a thread name to jump to the thread.

Thread: ALBA 2S Shaper Refurbishment - Lots of questions!
23/06/2017 16:06:36

Copper tubes on motor often just had a small flap over them.

Couple of drops of oil to lube the bearings.

A manual is available from, link here..


BS -1936 Refers to a British Standard about screw threads.

Edited By Brian Sweeting on 23/06/2017 16:13:01

Edited By Brian Sweeting on 23/06/2017 16:21:26

Edited By Brian Sweeting on 23/06/2017 16:22:14

Thread: Help with burner for Stuart boiler
22/06/2017 20:39:34

As Maurice intimated and the fact that your flames go out shows that the flame is not hot enough.

The copper tube is taking heat from the flame due to a lack of fuel supply. Open up the slots, I wouldvsiggest trying on a practice piece first.

Thread: Help with Propane torch please
16/06/2017 20:41:53

You can get a double nozzle Rothenberger 3.5012 burner which ups the heat output.

Quote from an advert...

Rothenberger 3.5012 ROFIRE Swivel PRO Double Barrel Brazing/Soldering Torch with 360° Swivel and High Heat Output As the Torch is double barrelled the following outputs are achieved - 2700 Degrees Centigrade with Mapp Gas and 1600 Degrees Centigrade with Propane. Torch will braze up to 1" and solder up to 64mm This item is a must for all AC and Heating/Plumbing Engineers, and a rare item. A truly superb item and Brand New with fast Dispatch ROFIRE Swivel PRO Double Barrel Torch with 360° Swivel and High Heat Output Get the job done quickly and easily with this torch. This makes soldering and Brazing more efficient by swivelling 360° and by having a very high heat output. A must have for any job. Features: • Head swivels 360 degrees • High heat output • Cyclone burner Established in 1949, Rothenberger has over 50 years of History as the market leader of innovative and technologically sophisticated pipe tools and machines. A long list of patents, Certification in ISO 9000, 9001 and 9002, and an emphasis in research and development result in continuous improvement and new developments in professional pipe tool technology.

No affiliation, just used them at work brazing refrigeration plant.

Edited By Brian Sweeting on 16/06/2017 20:43:31

Thread: Can an electric power steering pump drive a hydraulic ram
11/06/2017 22:25:39

Or try a Citroen hydraulic pump, belt driven, seen for +/- £75, produces over 2200psi.

Thread: Brown-out Protector project.
10/06/2017 18:31:16

Low voltage safety breakers have been part of the commercial world fir many years.

One of the potential problems in the UK is the stability of the mains frequency due to the varying inputs from green energy.

It used to be that the generators, power stations, could set their power output at 50Hz and there it would stay. Now however they have to keep adjusting it to compensate for the inputs outside of their control.

This has most affect on VFD and can cause frequent tripping off.

[Edit]Live data here...


Edited By Brian Sweeting on 10/06/2017 18:35:52

Edited By Brian Sweeting on 10/06/2017 18:37:02

Thread: Machine moving day.
09/06/2017 20:14:18

Gave the neighbours something to watch as well.

Thread: Steam Powered Computing
04/06/2017 12:22:27


Thread: Small cable connecting
02/06/2017 12:42:20

If they are small cables then I would recommend press fit connectors, these are self sealing. I have used them when at work on machinery.

Thread: Metallurgists
30/05/2017 15:37:54
Posted by Nick_G on 29/05/2017 16:22:51:
Posted by Mike Poole on 29/05/2017 15:47:26:

10,000rpm clutch drop?




Besides the slipper clutch should have taken care of it.


Doesn't a slipper clutch only slip on the over-run?

Thread: Air in the workshop
30/05/2017 15:29:58

Not an expert in this subject but would suggest checking that the pipe/tubing used is suitable for use with compressor oil as there will, no doubt, be some carry over.

Thread: Meddings pillar drill problem
25/05/2017 20:12:24

Is there a locking screw/nut somewhere that has tightened itself?

Thread: Drill bit sets
22/05/2017 20:08:53

Trust Tracy Tools, I've not had any problems with their stuff.

But, if you do they will sort it out.

No affiliation, just a local firm.

Thread: Dissolving the Dead
22/05/2017 15:32:05

Interesting read, thanks.

I suppose that there is always at least one person who dislikes whichever form of procedure, burial or cremation, is going to be performed so you'll never win.

Magazine Locator

Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!

Find Model Engineer & Model Engineers' Workshop

Support Our Partners
Eccentric July 5 2018
Allendale Electronics
Eccentric Engineering
Subscription Offer

Latest "For Sale" Ads
Latest "Wanted" Ads
Get In Touch!

Do you want to contact the Model Engineer and Model Engineers' Workshop team?

You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.

Click THIS LINK for full contact details.

For subscription issues please see THIS LINK.

Digital Back Issues

Social Media online

'Like' us on Facebook
Follow us on Facebook

Follow us on Twitter
 Twitter Logo

Pin us on Pinterest