By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for john carruthers

Here is a list of all the postings john carruthers has made in our forums. Click on a thread name to jump to the thread.

Thread: Greetings!
23/02/2019 08:35:25

Welcome Justin, lots of ATMs on here.

Thread: Hi from Deal
12/02/2019 08:43:46

Hi Dave, I recently moved away from Eastry to south Wales.
If you are looking for scrap pieces and off cuts try the scrap man off Poulton Close,( Coombe valley road).
He will let you root through the non ferrous bins and sells by weight.

Thread: Hi from Kent
12/02/2019 08:34:59

Hi Ricky, I just moved from Kent, have you seen the mill in classifieds at Gillingham?

Thread: Storing small lengths of steel stock
09/02/2019 07:52:51

I find a damp cardboard box held together with duct tape works well and it deters potential thieves from trying to carry it away.

Thread: New member (South Wales)
06/01/2019 08:43:58

Hello Steven and Richard, I recently moved to Margam from Kent and am hoping to get my shed set up in the next few weeks.

Thread: Lady Stephanie
04/12/2018 09:06:09

I have - somewhere...
We recently moved and my shed is in boxes still.
A new shed is on order so it shouldn't be long now.

Thread: Solar Tracker designed in Alibre Atom3D
02/12/2018 08:33:31

When I first started astronomy I used a mechanical time switch on a hinged board for very crude tracking.
Not the most accurate but smoother than hand driving a Haig mount.

Thread: Cost effective way of measuring 90degrees very accurately on Milling machine
02/12/2018 08:26:24

For an accurate square I use old optical prisms for 90d and 45d.
Even the worst prisms these days are quite good +/- 2 arc min surface 1/4 wave, while the better ones can be +/- 2 arc sec with a surface better than 1/20 wave.

**LINK**

Thread: Todays Mystery Objects?
27/11/2018 09:02:47

Ship's logs maybe ?

Thread: Mini-lathe dying..?
25/11/2018 08:56:27

I fitted one of Arc's lead screw grommets...
**LINK**

Thread: Used Flexispeed
25/11/2018 08:38:47

Beware of a Meteor II that has been over revved, the plain bearings don't like it.

Thread: 'shop tip from 1921
25/11/2018 08:35:40

Sawdust sweepings from the joinery shop floor would be cast into the iron stove, the lid jammed on quick and a concrete block hastily placed on top.
The resulting crown fire would procede along the ducting and shoot forth singeing the hapless joiners who had carefully directed the hot air vents toward their work stations.

Edited By john carruthers on 25/11/2018 08:36:02

Thread: The new talking Mercedes
16/11/2018 08:43:37

anecdotal evidence:
A recovery driver found he was often taking broken cars the Merc/BMW dealers, but had to ask a collegue how to get to the Toyota dealership.

I rest my case.

Thread: What did you do Today 2018
16/11/2018 08:34:47

^ in extremis I use nylon rolling pins yes

Thread: mini lathe chuck replacing.
26/09/2018 17:32:12

How about some larger diameter nuts, tapped M6, say 3/4" dia , or whatever will fit.
Could be knurled or use a tommy bar? or both?

I'm heading that way myself, fingers like bananas.

Thread: A question for Thomas the Tank Engine fans
25/09/2018 07:50:55

It may be that Thomas is reaching the end of his career? Often they start taking rough trade, jobs they would never have accepted in their prime.
Desperate merchandising deals, appearing in ads.
Then it's substance abuse and a downward spiral.
In and out of rehab, bankruptcy....

Lots of engines on the scrap heap crying 2

Thread: Junior Hacksaw Blades
15/09/2018 08:12:31

I thought I was buying Eclipse but as the tooth profile was 'rounded' and they could be tied in a knot I doubt they were the genuine article. Beware.
Luckily a neighbour is issued blades at work and he gave me a box full.
No name but excellent blades.

Thread: Is there something wrong with this vice?
14/09/2018 08:23:59

Maybe Hemingway do a set of castings to build a bolt shortener?
wink

Thread: Hum on phone.
26/08/2018 08:12:57

Try a different wifi channel?

Thread: Belt Driven Hacksaws -
24/08/2018 08:41:48

Absolutely nothing to do with the OP's problem but...
I once helped 'Old Mo' in renovating Crabble corn mill.
A huge long flat belt was called for, almost the length of the building.
The lads couldn't get the pulleys set right so Mo was called upon (did his time as a mill&engine wright).
He ordered all the windows and doors shut, then rigged a little motor to spin up the driver pulley.
He took his trusty oil can and squirted a dose of oil onto the spinning pulley.
A line of oil shot down the shop along the floor and up the far wall.
"just line up on that lads", and walked out

Magazine Locator

Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!

Find Model Engineer & Model Engineers' Workshop

Latest Forum Posts
Support Our Partners
emcomachinetools
Ausee.com.au
Warco
Allendale Electronics
Eccentric Engineering
Tee London LMES 6th Dec
cowells
ChesterUK
Eccentric July 5 2018
Subscription Offer

Latest "Wanted" Ads
Get In Touch!

Do you want to contact the Model Engineer and Model Engineers' Workshop team?

You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.

Click THIS LINK for full contact details.

For subscription issues please see THIS LINK.

Digital Back Issues

Social Media online

'Like' us on Facebook
Follow us on Facebook

Follow us on Twitter
 Twitter Logo

Pin us on Pinterest