By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for David Standing 1

Here is a list of all the postings David Standing 1 has made in our forums. Click on a thread name to jump to the thread.

Thread: Adept and Super Adept Register
19/05/2019 09:42:01

It is worth resurrecting this thread every once in a while, if only to note the late, great, JS's comments laugh

Thread: Machine moving recommendations.
17/05/2019 16:28:47

Been there with the machine moving dilemma on a number of occasions.

Pricing includes getting to you, and getting back to base, plus the extra mileage if they are not close to you.

If you are employing someone with a HIAB, you have the choice of a 3.5 ton vehicle, or 7.5 ton upwards.

Firstly, if you have 3 x 500 kg machines, that would probably put you over the weight carrying capacity of a 3.5 ton vehicle - 3.5 ton is the gross all up weight, on average they will probably carry a payload of around 1,000 kg/1 ton max.

With a 7.5 ton upwards vehicle, all of the costs are more because of the larger vehicle.

Truth is, if you employ someone to do it for you, nobody is cheap - it is a day out for them, a probably 350 mile round trip Manchester/London/Manchester, fuel costs, wear and tear on the vehicle, having to make a profit etc.

A commercial mover will also have the costs of employee salary, employee overheads, premises etc.

Thread: CROBALT...Lathe tools
10/05/2019 19:25:24

**LINK**

Thread: Turning Cast Iron question - Health & Cleaning Up
07/05/2019 08:36:04
Posted by Neil Wyatt on 06/05/2019 22:33:23:

stop me producing black snot for two days.

N.

Waaaaaaay too much information Neil surprise

Thread: What Did You Do Today 2019
01/05/2019 16:47:56
Posted by John Hinkley on 01/05/2019 16:05:38:

I'm all-metric as a rule

John

Lucky man, if only my life were that simple!

I have projects/machines that are:

Metric

BA

BSF

BSW

BSP

UNF

UNEF

UNC

Brass

Cycle

Enfield small arms standard

And probably some more I have forgotten!

Thread: Does anyone know where I can source a Myford 34t change gear?
29/04/2019 08:06:30
Posted by ANDREW GELSON on 28/04/2019 20:57:54:

RDG sell Myford spares

See posts #3 and #5 smiley

Thread: "Screwing" a car round a corner!
27/04/2019 14:34:14

Decades ago it would have been oversteer, today drifting.

Thread: Pivoting bolt
24/04/2019 17:52:20

A photograph, as ever in these situations, would help! smiley

Thread: DIY Bed Gap
24/04/2019 17:51:02
Posted by not done it yet on 24/04/2019 17:43:23:
Posted by Clive Brown 1 on 24/04/2019 16:18:20:

....

Being a Saab, these discs were quirky in that they included a drum for the separate hand-brake shoes. The working surface of these drums corroded very badly, as they didn't ever do any real work,. I could skim them with the same set-up.

Clive

Not particularly quirky or only Saab. Peugeot rear brakes had drums for the handbrake. They changed, between 2002 and 2005, to hand brakes using the discs.

If I recall correctly, at one time under the Motor Vehicle Construction and Use Regulations in force at that time, from a safety point of view, handbrake mechanisms had to be mechanical, and not hydraulic, operated. The drum within a disc arrangement got round this requirement.

Thread: Boxford X10 user manual pdf
21/04/2019 11:12:20

Douglas

If you didn't know, you might like to note this thread:

**LINK**

Thread: Lathe controls position
17/04/2019 17:53:46

My recently acquired Student has the start/stop/forward/reverse switch located on the saddle (the big red knob in the photo, stop in centre, up for reverse, down for forward)).

Very safe and very handy!

dsc_4630.jpg

Thread: Poor finish using indexable lathe tools on steel
15/04/2019 21:17:49

Reduce your tool overhang too, if you can.

 

 

 

Edited By David Standing 1 on 15/04/2019 21:18:08

Thread: How to get that high end paint finish
13/04/2019 13:52:55
Posted by Rainbows on 13/04/2019 12:44:06:

My current brush is a Synthetic Harris Trade Fine Tip 2" or 2 1/4". Its the second cheapest screwfix sold (I thought avoiding the truly cheapest might give me an edge). I was thinking that some bristles on a stick are some bristles on a stick no matter how cheap. Will have a look around for the more expensive brushes.

Think my sandpaper was 320 grit, was sanding dry but with all the paint immediately clogging my paper I was considering using water to see if that helped, will do so in the future.

I do not like synthetic brushes, they flick paint, and do not flow as well as real bristle.

Also, if your paper is immediately clogging with paint, the paint is too soft/hasn't fully gone off.

When you say sandpaper, do you really mean sandpaper? Sandpaper will fall apart if wet, only wet and dry will work wet.

I spent years working in bodyshops, so do have a bit of background in paint prep and finishing.

13/04/2019 13:48:19
Posted by Rainbows on 13/04/2019 10:15:19:

I looked at my mini lathe and they have done a pretty good job of getting a perfectly flat finish with some no doubt cheap labour. Can anyone see the part of my process that is giving me such uneven fninishes?

Remember if making a comparison that you are brush painting, and the manufacturers spray paint.

Thread: Milling curves
09/04/2019 10:09:17
Posted by Roy Garden on 21/03/2019 23:38:16:

Gents, I'm profoundly grateful for the advice, thank you all.
Through some budding bodgineering (which is what I aspire to) and using hints and tips from this thread, I've kind of got close to what I was after.

The "nail it to the table, and spin it round" advice kind of covers most of the equipment I currently have.
The "File it, it's faster and easier" Well, I have a car, driving to get a bacon buttie is fast and easy, flying there is a pain in the butt, slow, unreliable, fraught with wasted effort, but good fun ! (99 times out of 100, I'll take the easy option, but when it's new . . I'll go with the wasted effort just for the experience)
Can I file? Yes.
Do I want to file? No, that's why I bought a belt sander.
(Tho, having said that, I've never heard of using bearings whilst filing, Can I get a link for how that works? )


I went with the "Pin through a hole and rotate in the vice" method, Sadly, a long (ish) piece of work and a low vice meant I managed very little of the curve that way, but enough to get a "feel" for the shape, 5 minutes on the belt sander and, from a distance, with yer glasses off, in low light, it kind of, looks ok.

Probably 4 hours time playing with the mill today, I think the finish looks good (it's what I wanted to see)
I'm discovering that "machining" is probably best done by fairly accurate sawing, finished off by machining the bits the saw can't do and providing a surface texture.
An hour spent cleaning (that's new to me too, I'm sure I'll get faster) and the garage has a shiny, uncompleted "bit" in it, a clean shiny mill, and a happy bunny who is now waiting for more "essential tools" to arrive.
In the meantime, I can pick the swarf out of my socks . . .
(and try to hide the battery Dyson from the wife, it looks a bit sad for having eaten lots of aluminium swarf and WD40)

Thanks again, I shall be asking more questions as I blunder along the learning curve.

Edited By Roy Garden on 21/03/2019 23:42:20

Edited to remove oil rig language.

Edited By JasonB on 22/03/2019 10:03:55

I like your humour smile

Thread: Unusual drills
30/03/2019 18:53:39

A photograph would help smiley

Thread: Myford 254s accessories ?
26/03/2019 15:53:09
Posted by Karl Roberts on 24/03/2019 11:38:26:

Hi I’ve just purchased a myford 254s but I’m having massive problems trying to source a 3 point steady specific to the 254 which I need to need one important job required in my job, the lathe is in under condition pretty much so good condition the steady must be if possible

also I have sourced a genuine taper turning attachment specific to the 254 from Myford direct to Aid me in making customised cylindrical grinding centres but at over £500 I just can’t justify it so if anyone has one for sale please let me know.

.....oh and just one more thing the lathe is imperial so is anyone aware of a conversion kit for metric screw cutting available to buy as I can only find patches of parts required to do the full job needed for the conversion any help greatly appreciated

Karl

254 accessories are as rare as hens teeth.

If you don't buy the taper turning attachment that is available, chances are it will be gone. Home & Workshop Machinery had one, that has gone.

Thread: What new lathe?
26/03/2019 14:37:18
Posted by Bill Phinn on 25/03/2019 22:15:01:

The Colchester looks wonderful, David.

My initial thought was "he's got that nice Boxford and a Myford already. Why does he need the Colchester as well?"

And then I realised it was just my jealousy talking, and I might do exactly the same as you if I had the chance/space/funds.

Which is still jealousy talking, but amicable jealousy at least.

Bill

If it helps, the Boxford has gone wink

Lathe wise I have the Colchester, Myford 254S and Myford Speed 10 now.

26/03/2019 14:35:37
Posted by Nigel McBurney 1 on 25/03/2019 17:24:29:

Nice lathe,especially as it has the long bed,which does allow the tailstock to be pushed back out of the way,We all all have space problems,but rear access to the coolant tank and motor is adviseable,my Colchester master 2500 is back against the wall so the lathe has to be moved to get access to motor and tank.lack of regular cleaning of the tank led to corrosion and leaking of the tank,modern coolants go off quicker and bacteria form which turns the coolant into corrosive liquid.My Master has a 5 HP motor running off a converter and I certainly do not end up with 5 hp so get a good converter with more than adequate power,Though I have no personal experience perhaps some form of digital conversion to 3 phase may even be better,and worth investigating,no point in having a really good lathe which is underpowered.

Nigel

There is space to get between the 254S and the Student to get to the coolant tank - albeit on hands and knees!

Thread: Boxford X10 lathes
26/03/2019 14:01:51

Hopper

I believe the previous report was that they were selling some of their production machinery (like surface grinders, probably used in the X10 production process), and the building was up for sale.

My take on it after talking to the Boxford spares staff is that they are selling the site - which if you look has masses of unused space - robably to raise funds for a smaller site.

It appears they are concentrating on CNC machines and 3D printers, so will probably buy in production from the far east, possibly made to their spec, so just be a box shifter and not need the existing space.

Rumours of the factory being 'closed down' are just that I believe. They were certainly there when I spoke to them eight days ago.

Magazine Locator

Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!

Find Model Engineer & Model Engineers' Workshop

Latest Forum Posts
Support Our Partners
ChesterUK
Eccentric July 5 2018
Warco
Ausee.com.au
Eccentric Engineering
Allendale Electronics
emcomachinetools
Sarik
TRANSWAVE Converters
Subscription Offer

Latest "For Sale" Ads
Latest "Wanted" Ads
Get In Touch!

Do you want to contact the Model Engineer and Model Engineers' Workshop team?

You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.

Click THIS LINK for full contact details.

For subscription issues please see THIS LINK.

Digital Back Issues

Social Media online

'Like' us on Facebook
Follow us on Facebook

Follow us on Twitter
 Twitter Logo

Pin us on Pinterest