By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for Graham Titman

Here is a list of all the postings Graham Titman has made in our forums. Click on a thread name to jump to the thread.

Thread: Motorcycle General Discussion
08/10/2021 13:01:52

A friend now deceased had a BSA A10 and palmer sidecar forks built by exe sidecar racer call Bill Cooper wheels were 16inch dunlop sidecar racing his party piece was put it on full left lock a big handful of throttel and watch the sidecar wheel go backwards .the bike was built that low the sidecar wheel hardly ever come of the floor.

Thread: Keeping fit and the economy
19/08/2021 19:41:16

Ndiy my runner beans when i grew them i nip the ends off as walking up the garden and place in mouth and chew nearly all gone by the time i got to the kitchen and very nice in salads cooking spoils them

Thread: Motorcycle General Discussion
08/08/2021 12:44:57

DiogenesII you have a pm

Thread: Moving vice on mill table....
06/08/2021 10:07:48

Are the bolts in the tee nuts bottoming on the slot try putting a washer under the head of the bolt.

Thread: Anyone know what is going on at Homeworkshop?
06/07/2021 09:20:23

Thanks Ketan people seemed more concerned about the site than Adam

05/07/2021 17:40:18

We still do not know if Adam is ok

05/07/2021 14:13:32

I think Steve Cox is landy lift one of the advertisers the site was last updated at 23 mins past midnight

Edited By Graham Titman on 05/07/2021 14:15:42

Thread: KENNIONS MODEL ENGINEERING SUPPLIES
04/06/2021 19:15:40

Hope you had a happy birthday Bill

Thread: First steps with a Shapeoko router table
27/05/2021 18:59:40

Well done John following this with great interest.

Thread: Can 2 people use the same mobile with NHS Covid app?
17/05/2021 12:51:45

Hi George i use Opera browser and DuckDuck go and it cuts down on a lot of the ads.

Thread: Ropey Radio Reception?
07/05/2021 12:49:26

My Dab radios will not work in the workshop when the inverter is in use so no planet rock in the workshop

Thread: Shipping to the EU - beware!
06/05/2021 18:54:19

I have just been looking for fish food which has become difficult to get in 200gram tubs he is a large fish.

On the auction site from usa 25$ plus 134$ postage i finally tracked some down for £12-49 including postage.

Thread: A new 'take' on Finite Elements
01/04/2021 18:25:41

It's phenomenal when you think each ring is hand made and all fixed by hand the number of man hours unbelievable.

Thread: A new job
30/03/2021 12:28:54

God on you Windy always enjoy reading your posts . Watch the scooter i tipped them over in the past going down forest tracksnerd all the best

Thread: Tracytools
26/03/2021 15:56:56

I have dealt with them on and off for 20 years and the service has been excellent couple of small problems replaced without question and very quick mostly next day .Graham

Thread: Tea Spoons
25/03/2021 17:54:30

Thanks Nigel Graham 2 that made it look cleaner than when it was new half a dozen rinses and the smell has gone and i can still use the bleach for it's original use .Thanks again Graham

23/03/2021 19:13:23

I have tried most of the above in my stainless coffee jug i don't fancy drinking my coffee after having bleach in it has anybody got any other thoughts please. The inside of jug is nearly black after a few months so much for stainless.

Thread: Forum update
24/02/2021 11:30:59

On another forum i am on the moderators have just admitted that they can go into the archive if there are complaints of bulling and abuse for the integrity of the forum and as is often said think twice before you press the send button if you would not like your grand mother to see it do not send it.

Thread: Disposal of casting sets - other than EBAY
04/02/2021 12:40:15

I think it might have helped if you had put a photo of each one not everybody would know what the castings numbers or what they are for.I looked at them but did not have time to wade through stewarts site to find out what was what.

Thread: New ways to skin a cat
17/01/2021 12:39:04

Or buy John Stevenson er block from Arc Euro little bit cheaper than importing from the states and do the same job

Magazine Locator

Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!

Find Model Engineer & Model Engineers' Workshop

Latest Forum Posts
Support Our Partners
Eccentric July 5 2018
cowells
JD Metals
walker midge
BOLDON
emcomachinetools
Warco
rapid Direct
Eccentric Engineering
Subscription Offer

Latest "For Sale" Ads
Latest "Wanted" Ads
Get In Touch!

Do you want to contact the Model Engineer and Model Engineers' Workshop team?

You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.

Click THIS LINK for full contact details.

For subscription issues please see THIS LINK.

Digital Back Issues

Social Media online

'Like' us on Facebook
Follow us on Facebook

Follow us on Twitter
 Twitter Logo

Pin us on Pinterest