Forum sponsored by:

Machinability of materials

All Topics | Latest Posts

Please login to create a new thread

Please note, this topic is pre-moderated and postings will not appear until they have been approved.

	Thread	Replies	Views	Latest Post
	Free Machining Stainless Steel By Stub Mandrel	19	1568	15/05/2013 10:01:13 by mechman48
	High Tensile: What Steel Grade? By Chris Trice	11	577	03/05/2013 15:33:00 by Chris Trice
	Machining Titanium *ANY* advice sought By Alf Jones	24	3086	24/04/2013 23:13:50 by Chris Heapy
	Teflon glide bearings By Bob Perkins	6	533	23/04/2013 16:45:27 by Chris Heapy
	Turning hard stuff By Versaboss	3	863	11/04/2013 21:06:20 by Gary Parkin
	Nickel Uses By Rik Shaw	7	667	05/04/2013 12:25:02 by Rik Shaw
	Aluminium Castings in LM4 By Alan Worland	3	681	18/03/2013 23:43:53 by Alan Worland
	The curious 'life' of a rivet Annealing aluminium rivet By Speedy Builder5	4	1142	12/02/2013 22:13:23 by frank brown
	That's one small step . . . By Jim Cahill	11	1095	11/02/2013 00:39:48 by jason udall
	Machining EN36 Steel EN 36 By Old School	6	836	29/01/2013 12:53:14 by Old School
	Which tool to cut small rods of D2 steel By JS	17	943	28/01/2013 00:22:11 by Jon
	Uses for gauge plate By Windy	5	636	25/01/2013 10:44:02 by Ian S C
	The Cambridge Turning Trials Introductory Post - EN3B By Andrew Johnston	60	8905	09/01/2013 18:20:40 by Raymond Anderson
	White metal - its availability & uses ? By clivel	33	4215	07/01/2013 11:00:35 by Ian S C
	Medium carbon steels By Siddley	10	954	05/01/2013 16:12:46 by Siddley
	Turning Perspex rod By sparky mike	52	4817	02/01/2013 01:04:37 by Chris Trice
	Bar stock Redundant stock By jason udall	50	6064	23/12/2012 12:57:21 by jason udall
	Toilet handle spacer - need to turn one Need to know how to cut/thread plastic By John Coates	13	976	20/11/2012 07:16:00 by John Coates
	Tip build-up By Peter G. Shaw	44	4317	11/10/2012 21:13:06 by Peter G. Shaw
	Machinability of Drill-Rod By Sid Herbage	32	2946	28/09/2012 23:21:19 by David Littlewood

All Topics | Latest Posts